EV Charging Connector Safety Tester for European Standards

Comprehensive Safety Testing System for European Standard AC/DC EV Charging Connectors

Product overview:

This testing system primarily checks the functionality of AC and DC guns meeting Chinese, European, and American standards. Each gun can be assigned a unique QR code, and test results are automatically saved to a report. Passing results can be printed. All functions are automatically tested in one go.

This system is highly efficient and labor-saving, making it suitable for full batch inspections in factories.

Test Contents:

• Test each wire for breakage, continuity, short circuit, and incorrect wiring sequence.
• Test main line continuity resistance.
• Test internal resistors (including pushbuttons in both pressed and unpressed states).
• Test electronic lock function.
• Test inter-wire insulation.
• Test inter-wire withstand voltage.
• Test thermocouple wires.

Technical parameters:

• Power input: Single-phase AC 220V/50Hz;
• Air supply input: 0.6MPa;
• Control system: PLC + industrial computer;
• Computer integration with an MES system (optional, additional cost);
• Data is input into the computer using a scanner. The device comes with a scanner that can scan barcodes on the product under test. Before testing, scan the barcode or QR code on the product. After the test, the scanned barcode can be associated with the test record, allowing subsequent test data traceability.
• The device uses PLC input and output to scan and detect wire breaks, continuity, short circuits, and wire sequence misalignment. The PLC automatically determines whether the test is qualified after the test is completed.
• Built-in resistance test range: 1-5000Ω, with an accuracy of 1%.
• Set the upper and lower limit values to determine whether the resistor is good.

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.