Product Description:
The structure mainly includes the following parts: main shaft
transmission device, lower plate up and down moving device, upper
plate up and down moving device, lower plate feeding device, column
guide device, mold regulating device, hydraulic lubrication device,
main electric control box.
The lubrication point ofthe machine is fully automatic lubrication
Spindle CAM immersed in oil tank lubrication
Upper sliding body seat pin shaft, guide column and guide column
sleeve through the oil pump lubrication.
The return oil is collected through the oil jacket and flows back
through the pipe to collect the tank.
The oil on the fin flows back to the volatile oil collection box
through the collection hole of the cover to realize different oil
isolation recovery.
Features:
- Compact structure, reasonable design, high precision equipment.
- Drive spindle lower
- Automatic lubrication system and oil circuit separation collection.
- Easy to debug
- In order to meet the needs of different wave distances in sprints,
the feeding device ofthe lower plate has been improved.
Technical Parameters:
| Technical Parameter | Value |
|---|
Material strip number | 1 |
Fin width | 450 mm |
Drive mode | Motor drive |
The inner diameter of the material belt cylinder | 75mm~ 150mm |
Feed speed | 0~4000 mm/min |
Feeding frequency | 0~25 times /min |
Use power supply | Three-phase 380V |
Maximum fin height | 12mm |
Vertical stroke of machine tool | 14mm |
Applications:
*The transmission mode between the transmission reducer and the
main shaft is changed from direct transmission to multi-wedge belt
flexible
transmission to reduce the damage to the machine due to poor
alignment.Reducer with more bearing capacity of the helical gear
reducer.
* The main shaft is equipped with a flywheel, which makes the
transmission more stable by the energy storage function of the
flywheel.
* Set a separate debugging reducer, and equipped with
electromagnetic clutch device, debugging more simple and easy, and
more reliable.
According to the fixed wave number for cutter feeding, meet the
production offin continuous die, servo motor control drive wheel
drive fin feed, reach the specified fin length or wave number, PLC
control cutter cutting.
Driving wheel height adjustment mode, can be adjusted by single
head screw, also can be adjusted by hand wheel overall.
