Interior Fine Travertine Texture Wall Paint 20kg Matte Luster And Frosted Texture

Texture Wall Paint 20kg Fine Travertine matte luster and frosted texture interior wall Wall decoration indoor wall Building interior wall Concert halls Office buildings Factory

Product Introduction

Ossinite is a simple and elegant diatom art paint. The product has the characteristics of high hardness, wear resistance, scrub resistance, mildew resistance and antibacterial. Its texture is flat and delicate, which is very suitable for high-end home space decoration.

Technical parameters

 Theoretical dosage: about 0.6-0.8㎡/KG/finished product depending on the specific process. The actual construction area will vary due to different personal construction techniques and processes.
 Dilution ratio: It is not recommended to add water. A small amount can be added in summer according to actual conditions.
 Drying time: Depending on the actual construction process, the drying time varies.
 Maintenance time: 7 days/25℃, low temperature (not lower than 5℃) can be extended to obtain the ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of Harmful Substances in Wall Paints for Buildings", GB/T9756-2018 "Synthetic Resin Emulsion Interior Wall Paint" superior products.
 Product specifications: 20KG/barrel.
 Shelf life: See product label.

Usage

Construction method: batch coating, etc.
Construction tools: material tray, palette knife, textured paper, short-hair roller, brush, batch knife, crystal scrubbing board, etc.
Construction process: ①On the putty layer, roll-coat one time of penetration and sealing primer, and wait until it is completely dry;
②Roll-coat the first time of Imosha S primer, and wait until it is completely dry;
The primer needs to be the same color (the same color as the topcoat), and the materials need to be mixed evenly. When constructing, it is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, from inside to outside, from easy to difficult, and use a roller or spray gun to evenly apply the slurry to the wall. The force should be uniform and no missing is required; after the primer is completed, the wall needs to be patched, and the primer must be applied after the patch is polished and smoothed; after the primer is rolled over a large area, the corners of the wall must be painted in place, and the coating surface must be allowed to dry and dry to the touch, and the topcoat can be applied only after the finger pressure is not sticky.
③Roll the second coat of Imosha S primer and wait for it to dry thoroughly;
④Scrape the first coat of Aojingshi and wait for it to dry thoroughly;
⑤Scrape the second coat of Aojingshi and then use a crystal scrubbing board to rub out the texture. When it is 70% to 80% dry, use a trowel to gently smooth it out until it is flat and dry thoroughly;
⑥Roll the inorganic diamond topcoat once.
Construction environment: It is not suitable to construct when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement (pH value below 10, moisture content below 10%) should be dried before construction.
During construction, please configure necessary protective and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
Before construction, the paint should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.

Precautions

If the product leaks, it can be covered with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If this product accidentally enters your eyes when using it, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unknown information, please ask the local dealer for the product manual.

Company Profile

Founded in 2014, Lantiden New Environmental Construction Material Co.,Ltd   invested 3 billion yuan to establish Asia's largest diatom industrial park in Yueyang, Hunan.With a total construction area of about 310,000 square meters. The first phase of the project covers 100 acres. 

The products are two major sectors: architectural paint and customized home furniture. 
The architectural paint sector includes interior wall paints, exterior wall paints, auxiliary materials. The home furniture sector includes whole-house customization wardrobe, kitchen cabinet,  interior door. 

With advanced production equipment, R&D and management system. It has been awarded the title of China Diatom Industry Demonstration Base. It is the leading enterprise in the domestic diatom mud industry, the chairman unit of the China Diatom Mud Association, the pioneer of water-based diatom paint, and has been the preferred brand of diatom mud suppliers for China's top 500 real estate developers for five consecutive years. 

Lantiden will always be committed to green home and create a better life as its mission, with the continuous provision of products and services to improve the living environment as the development direction, bringing a low-carbon and eco-friendly life to tens of millions of families. 

Company Culture

Mission

Commitment to healthy home, create a better life

Core Value

Altruistic, Transparent, Efficient, result-oriented

Development Philosophy

Health-based, creating a hundred billion quality homes

Vision

Become China's largest healthy home furnishing production service provider

Become the preferred choice of home furnishing brand in the mind of clients

Social Responsibility
 

Lantiden dedicates itself to advancing living environment technologies through eco-friendly innovations in green building materials, energy conservation, and environmental protection.

We uphold sustainable development principles that harmonize resource efficiency with ecological balance.

Our Commitment in Action:

"Blue Classroom" Initiative: transforming learning spaces for underprivileged children

 Veteran Empowerment: one-on-one poverty alleviation programs in Xiangxi

 Entrepreneurship Support: helping retired soldiers launch businesses

Led by Chairman Mr.Tong Binyuan—a National Model Veteran—Lantiden maintains an ongoing commitment to social welfare, turning compassion into tangible impact.

Company Honor

National high-tech enterprise
Hunan Province new materials enterprise
Vice president unit of China Building Decoration and Renovation Materials Association
Top 100 enterprises in China's home decoration and renovation materials industry
Quality supplier of Hunan real estate industry
Golden Honeycomb Award of China Diatom Mud Industry
Hua Tu Award of China Building paints Industry

Brand Honor

CCTV One Town One Product strategic cooperation brand
China Green Building Product Selection Catalog selected brand
China Green Building Materials Consumer Protection Project selected brand
China Building Materials Network selected the top ten brands in the diatom mud industry

China's top 500 real estate developers supplier preferred brand (diatom mud paint category) 2018-2024
China's diatom mud industry leading brand
China's diatom mud industry technology innovation brand
Hunan home furnishing industry top ten influential brands