The FS2586 series through-hole waterproof conductive slip rings
offer a dielectric strength of 1000 VCA, are compatible with
simultaneous power and multi-signal transmission, and are vibration
and temperature resistant, making them suitable for medium-sized
equipment such as robotic arms and packaging machines.
FS2586 series Features
1. The 25.4mm center hole is designed specifically for
medium-diameter shafts. It can be directly installed in equipment
such as robotic arm joints and packaging machine shafts without
reducing the shaft diameter, simplifying the assembly process.
2. 6-24 channels support mixed transmission of "power + multi-type
signals," such as simultaneous input of 220V power, RS485 control
signals, and temperature sensor signals, meeting the
multi-functional coordination needs of equipment.
3. The metal housing has been enhanced for vibration resistance,
preventing internal components from loosening in industrial
environments with vibration frequencies ≤100Hz, extending
maintenance intervals.
4. The conductors utilize AF200-17AWG Teflon wire, which is
temperature-resistant up to 200°C. This prevents insulation failure
caused by high-temperature aging in rotating parts near heat
sources, such as the shafts of drying equipment.
5. The system can be upgraded to IP68 protection, with a sealing
structure optimized for installation clearances in medium-sized
equipment. In shallow water environments, no additional waterproof
sealant is required after installation.
FS2586 series parameters
Parameter name | Parameter Value |
Power | Signal |
Dielectric strength | 1000VCA@50Hz,60s | 300VCA@50Hz,60s |
Insulation resistance | ≥1000MΩ/100VDC | ≥1000MΩ/100VDC |
Dynamic resistance change value | ＜10mΩ |
Rated voltage | 0～440VDC/VAC |
Wire Specifications | Teflon wire (actually change the wire specifications according to
the load conditions) |
Wire length | Default 300mm (can be adjusted as required) |
FS2586 series application scenarios
Mainly used in underwater robots, marine exploration equipment, oil
field drilling, chemical production lines, water treatment plants,
aerial work vehicle rotating platforms, hydrographic buoys, large
irrigation turntables, offshore wind power operation and
maintenance ships, pickling production lines, beer machines,
filling machines, etc.
