ASTM B366 Alloy C22 (UNS N06022) Butt Weld Elbows | Superior
Corrosion Resistant Nickel Alloy Fittings
Introduction: The Pinnacle of Corrosion Resistance in Nickel Alloy
Elbows
Alloy C22 (UNS N06022) Butt Weld Elbows manufactured to ASTM B366
represent the gold standard in corrosion resistance for demanding
industrial piping systems. This nickel-chromium-molybdenum-tungsten
alloy offers exceptional performance in oxidizing and reducing
environments, handling chlorides, acids (including sulfuric,
hydrochloric, phosphoric), and mixed acid/salt solutions where
lesser alloys fail. Our precision elbows ensure leak-free flow
direction changes in critical applications worldwide.
Alloy C22 Chemical Composition: Engineered for Maximum Stability
The outstanding corrosion resistance of C22 elbows stems from its
tightly controlled, balanced chemistry:
Table 1: ASTM B366 Alloy C22 (UNS N06022) Typical Chemical
Composition (Weight % Maximum Unless Noted)
| Element | Nickel (Ni) | Chromium (Cr) | Molybdenum (Mo) | Tungsten (W) | Iron (Fe) | Cobalt (Co) | Carbon (C) | Manganese (Mn) | Silicon (Si) |
|---|
| Requirement | Balance | 20.0 - 22.5 | 12.5 - 14.5 | 2.5 - 3.5 | 2.0 - 6.0 | ≤ 2.5 | ≤ 0.015 | ≤ 0.50 | ≤ 0.08 |
Key: This precise Ni-Cr-Mo-W balance creates a highly stable
passive film, resisting pitting, crevice corrosion, and stress
corrosion cracking (SCC).
Alloy C22 Equivalent Grades: Global Material Recognition
C22 elbows are specified under various international standards for
identical/similar corrosion performance:
Table 2: Alloy C22 (UNS N06022) International Equivalent
Specifications
| Standard System | UNS | EN (Europe) | W.Nr. (DIN) | ISO | JIS (Japan) | GOST (Russia) | Common Trade Names |
|---|
| Designation | N06022 | NiCr21Mo14W | 2.4602 | NW 6022 | NW 6022 | ХН60МВЮ | Hastelloy® C-22, INCONEL® alloy 622 |
Note: Equivalency indicates similar corrosion performance; verify
specific standard requirements for interchangeability.
Alloy C22 Mechanical Properties: Strength Meets Fabricability
C22 maintains excellent mechanical properties even in aggressive
service conditions:
Table 3: ASTM B366/B564 Alloy C22 Typical Room Temperature
Mechanical Properties (Wrought & Annealed Condition)
| Property | Tensile Strength (min) | Yield Strength (0.2% Offset, min) | Elongation (in 2" or 50mm, min) | Hardness (Rockwell B, max) |
|---|
| Requirement | 690 MPa (100 ksi) | 310 MPa (45 ksi) | 40% | 100 HRB |
| Typical Achieved Value | 780-895 MPa (113-130 ksi) | 360-415 MPa (52-60 ksi) | 55-65% | 75-90 HRB |
Key: High ductility (Elongation) ensures good formability for
elbows, while strength exceeds most corrosive service needs.
Alloy C22 Elbow Product Range: Precision Formed for Critical
Service
We supply the full spectrum of ASTM B366 C22 butt weld elbows for
seamless system integration:
- Types: 90° Elbows (LR & SR), 45° Elbows, 180° Returns (LR & SR)
- Dimensions: ASME B16.9 / MSS SP-43 (Standard), ASME B16.28 (Butt
Weld Short Radius)
- Sizes: 1/2" NB (DN15) to 48" NB (DN1200)
- Wall Thickness: SCH 5S, SCH 10S, SCH 40S, SCH 80S, SCH 160S, XXS;
Also available per customer specified thickness (WT).
- Manufacturing Process: Seamless (SMLS) or Welded & Solution
Annealed (mandatory for corrosion resistance).
- Ends: Beveled ends (ASME B16.25) ready for welding.
Alloy C22 Elbow Dimensional Tolerances: Precision Guaranteed
Our elbows conform to strict dimensional standards ensuring fit-up
and weld integrity:
Table 4: Key Dimensional Tolerances per ASME B16.9 for Alloy C22
Elbows
| Parameter | Tolerance |
|---|
| Center-to-End (90° LR) | ±1.6mm (1/16") for NPS ≤ 24", ±3.2mm (1/8") for NPS > 24" |
| Center-to-End (90° SR) | ±1.6mm (1/16") for all NPS |
| Center-to-End (45°) | ±1.6mm (1/16") for NPS ≤ 24", ±3.2mm (1/8") for NPS > 24" |
| Out of Roundness (Ovality) | 1% of Nominal OD max (after welding prep) |
| Wall Thickness | ±12.5% of ordered nominal wall (subject to mill tolerance of raw
pipe/tube) |
| Bevel Angle | 37.5° ± 2.5° |
| Bevel Land (Face) | 1.6mm ± 0.8mm (1/16" ± 1/32") |
Alloy C22 Elbow Applications: Conquering the Most Aggressive
Environments
These elbows excel where corrosion resistance is paramount:
- Chemical Processing: Reactors, mixers, piping for HCl, H2SO4,
H3PO4, acetic acid, chlorine, solvents.
- Pollution Control (FGD/Scrubbers): Ducts, headers, mist
eliminators, absorber towers handling hot, wet SO2/Cl⁻/F⁻.
- Pharmaceutical: High-purity process lines, CIP/SIP systems
requiring contamination resistance.
- Pulp & Paper: Bleach plants (chlorine dioxide, hypochlorite),
digesters, liquor lines.
- Waste Incineration & Treatment: Flue gas, ash slurry, and leachate
handling systems.
- Marine & Offshore: Seawater cooling, ballast water treatment,
chemical injection.
- Nuclear Fuel Reprocessing: Handling nitric acid and fission
products.
- Acid Mining & Metal Refining: Electrowinning, pickling, electrolyte
handling.
Why Choose Our ASTM B366 Alloy C22 Elbows?
- Material Integrity: Mill Test Certificates (MTCs) per EN 10204
3.1/3.2 guaranteeing full traceability and compliance.
- Precision Manufacturing: Strict adherence to ASME B16.9/B16.28
dimensional tolerances for perfect fit-up.
- Optimal Corrosion Resistance: Solution annealing per ASTM B366
ensures maximum alloy performance.
- Global Availability: Stocked in key sizes; custom orders fulfilled
promptly.
- Technical Expertise: Engineering support for material selection and
application suitability.
Order Your Corrosion-Resistant Solution Today!
Request a quote for ASTM B366 Alloy C22 (UNS N06022) Butt Weld
Elbows in your required size, schedule, and quantity. Specify angle
(90°/45°/180°) and radius (LR/SR).
