Reverse osmosis process uses semi permeable spiral wound membranes
to separate and remove dissolved solids, organic, pyrogens, sub
micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 7-10/cm2
through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered
as purified water. Impurities in the water are concentrated in the reject stream and
flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved
solids (TDS), 99% of organic, including pyrogens, and 99% bacterial
in the feed water.
*Raw water Range we can do: Brackish water TDS less than 1000ppm,
ground/well water, city water,rains,river/lake water ... or according to customer's requirements
*Capacity we can do;500lph,1000lph,2000lph,3000lp...50000lph,or according to customer's requirements
*Output water application:drinking/irrigating water, commercial
bottled selling water,human consumption drinking water...or according to customer's requirements
Raw water pump - Sand filter - Carbon filter -Cartridge filter -
High pressure pump- RO membrane host-RO membrane-UV -Ozone
1. Raw water supply pump
2. High-pressure pump
3. Reverse Osmosis Membrane:
4. Pre-treatment device
5. Conduit: To use PVC/SS
6. Electric standard configuration: PLC automatically control
7. Electrical components: To use Zhengtai's and Sch**der's products
8. Frame: To use stainless steel.
