ASA Synthetic Resin Roof Tile 2.5-3.0MM Fireproof Corrugated

purplish red brick red gray blue gold

Containe

r Load

capacity

6.Archaize imapct wearther board

Archaize impact wearther board referred to as "drop of water eaves",install on the tile at the eave.

1.Main tile

The main tile to installed on the purling size as 600 mm to 900 mm

7.Vertical wall fleshing board

Installed in the main tile between both sides can be used for drainage.

2.Tee tile

Installed in the three sides slope border which could cover three ridge tile

8.Left/right hand side eave board

To install the Left/right hand side eave board on the two adge sides of the main tile

3. Four-ways tile

In all around the border of the slope place,covering the four ridge tile.

9.Endcap of main ridge tile

After to installed the main tile and the main ridge tile to seal the endcap of main ridge tile

4.Tilted ridge tile

Tilted ridge tile to covering the two sides of the main tiles

10.Main ridge tile

Installed on the two main borders,which could cover the two main tiles on it.

5. Head sealing tile

To install the head sealing tile on the end of the tilted ridge tile

•The Purlin can choose square tube (60*40*3mm) or C-type steel (100*50*20*3mm)

or anticorrosive wood square(60*40mm)

• The main tile should be installed in reverse direction according to local wind direction,

with transverse overlap of a tile wave and longitudinal overlap of at least a pitch.In addition ,

ridge tile is truncated to prevent water seepage from the overlap of the tiles due to large gap

•Main ridge tile and tilted ridge tile should be sawed to level state at the overlap location and

the Tee is installed after installing the main ridge tile and tilted ridge tile.The slope angle should be

considered while installing the ridge tile to avoid water leakage due to too low gradient.

•The fixed parts are special parts.Pre-drilling should be carried out before fixing ,the bore should

be 2mm bigger than the screw diameter

Foshan Yiquan Plastic Building Material Co.,Ltd.Our company has rich experience in synthetic resin tile and PVC plastic tile product manufacture .Our skilled technical team and high-standard quality control,we are able to produce high quality products and managed to keep our cost performance at a high level.

Yiquan plastic building materials is willing to work with you hand in hand advance together,altogether creates magnificently!