KL6Ex rechargeable ATEX LED mining headlamp
Product descripsion
| Item | KL6Ex |
| Battery style | Li-ion |
| Rated capacity | 6Ah |
| Rated voltage | 3.7V |
| Lighting time | >16h |
| Main light source | Working current | 0.28 A |
Max luminance (1m apart from the lamp) | When lighting begins | >7000lx |
| After lighting for 11h | >6000lx |
| Life of cap lamp | 2 years |
| Charging Voltage | (6-8)V |
| Charging time | ≤10h |
| Explosion protection | Ex ia I Ma |
| Protection grade | IP65 |
| Dimensions of battery case | 105×31×120 mm |
| Weight | 0.63kg |
| Certificate | ATEX |
| Optional device | KZC1A Single charger KZC10A 10 unit charger KZC80A Charging rack |
Characteristics
a) The miner’s cap lamp consists of Li - ion batteries and a new
generation LED light source.
b) The electronic switch controls the ON/OFF of the main light
source and auxiliary light sources.
c) The miner’s cap lamp has multi-functional protection.
d) A charging control circuit is fitted inside the headpiece of the
miner’s cap lamp. This circuit enables the miner’s cap lamp to be charged on other manufacturers’ charger.
e) Due to the high efficiency and long life of the LED light source, it is not
necessary to replace within the lifetime of miner’s cap lamp.
f) The miner’s cap lamp is compact, light in weight, maintenance
free, long in service life,intrinsically safe and environmentally friendly.
Features
(a) Short Circuit Protection - In the event of a short circuit in
the headpiece or cable, the battery protective plate will cut off the power supply in 15ms. If, for any reason, this protection fails to operate, the
current limiting resistance and quick-acting fuse will restrict the current to meet the requirements of the intrinsically safe standard.
(b) Over-Current Protection - In the case of an abnormal current increase, the battery
protective plate will cut off the power supply in 15ms. If, for any reason, this protection fails to operate, the
current limiting resistance and quick acting fuse will restrict the short circuit to meet the requirements of the intrinsic safety standard.
(c) Battery Protection - in addition to the above, over-current and over-heating protective PTC devices is built into
the battery.
Standards
The miner’s cap lamp complies with the following Standards:
EN 60079-0:2012+A11:2013; EN 60079-11:2012; EN 60079-35-1:2011; EN
50303:2000
OPERATIONAL SAFETY
a) It is strictly prohibited to dismantle the headpiece to replace the light source at underground mines.
b) Our chargers are non-explosion proof products therefore underground mine use is strictly prohibited
c) Unauthorized personnel must not undertake disassembly, repair of
the miner’s cap lamp and the charger.
d) It is prohibited to change the circuit or connection methods, as this will invalidate the Explosion Proof Certificate.
e) The battery must not be put into a fire or be heated.
f) Scrapped batteries should be handed to local environmental services/departments for disposal.
g) The battery capacity may reduce discharging time in a cold or overheating environment
h) The miner’s cap lamp should be stored with battery capacity of more than 80%. Extended storage would permanently damage the
battery. It is suggested that the miner’s cap lamp be charged again
if its storage term exceeds 3months.
Detail pictures
Matched chargers
Related products
Our company
FAQ
Contact us
Shannon Tao
Oversea Business Department
Shaanxi ASTTAR Explosion-proof Safety Technology Co., Ltd
Add: No.3699 Shangyuan Road, Caotan Ecological Industrial Park,
E&T Developing Zone, Xi'an, China, 710021.
T: +86 2986113366 Ext: 809|F: +86 2986562003|M: +86 13572086068
Skype:gokangshannon|WhatsApp/Wechat: +86 13572086068|QQ:2880090115
www.asttar.net www.gokang.com
www.asttar.net www.gokang.com
