16+2F Gigabit Network Managed Industrial Ethernet Switch
Gigabit Network Managed Industrial Ethernet Switch Advantage
Ø Double optical ports are connected to the port, which can be used
for long-distance transmission and adapt to
the cascade and expansion of various ring/chain networks, making
networking easier;
Ø Full Gigabit high-speed transmission, high-bandwidth transmission
is stable and guaranteed, supporting the
speed and flow control of each port, realizing 10M/250 m
long-distance transmission, easily solving the long-distance
communication problem of network cable and meeting the needs of
different users;
Ø Industrial-grade high-bandwidth switching chip, high backplane,
large cache, reducing network congestion;
Ø Support IEEE802.3X full-duplex intelligent flow control,
high-definition transmission with large bit stream
without jamming;
Gigabit Network Managed Industrial Ethernet Switch Overview
LNK-GY216M series full Gigabit Layer 2 network management Ethernet
switch has 16 Gigabit network ports
and 2 Gigabit uplink SFP optical ports, and all ports support
line-speed forwarding.
LNK-GY216M has L2+ network management function, supports IPV4
static routing and forwarding, supports
complete security protection mechanism, perfect ACL/QoS policy and
rich VLAN functions, and is easy to
manage and maintain. Support a variety of network redundancy
protocols STP/RSTP/MSTP(<50ms) and
ERPS(<20ms) ring network protocols, improve link backup and
network reliability, and when one-way network
fails, communication can be quickly restored to ensure
uninterrupted communication of important transmission.
According to the actual application needs, IP management, port flow
control, VLAN division, QoS, LACP, IGMP
and DHCP, security policy and other application services are
configured through network management methods
such as Web, CLI, SNMP and Telnet.
Gigabit Network Managed Industrial Ethernet Switch Technical
Indexes
POE and power supply characteristics |
input voltage | DC12-57V |
Power consumption of whole machine | Standby power consumption: < ＜15W；; Full load power consumption: < ＜20W |
Supporting power supply | By default, it is not equipped with power supply, so it needs to be
purchased separately. It is recommended to choose DC24V/1A. |
Physical specification parameters |
Heat dissipation mode | Fanless natural heat dissipation |
Operating temperature/humidity | -40～+75°C； 5% ~ 90% RH has no condensation. |
Storage temperature/humidity | -40～+85°C； 5% ~ 95% RH has no condensation. |
Appearance size (L*W*H) | 195*145*48mm |
Net/gross weight | ＜1.5kg / ＜1.8kg |
Installation mode | Desk-top installation |
Product certification and quality assurance |
Lightning protection/protection level | Port lightning protection: 6 kV 8/20 US; Protection grade: IP40 |
Applicable industrial standards | IEC 61000-4-2 (ESD): 8 kV contact discharge, ±15kV air discharge. IEC61000-4-3(RS):10V/m(80~1000MHz) IEC61000-4-4(EFT): power cord: 4 kV; Data line: ±2kV IEC61000-4-5(Surge): power cord: cm 4kV/DM 2kV; Data line: ±4kV IEC61000-4-6 (radio frequency conduction): 10V(150kHz~80MHz) IEC61000-4-8 (power frequency magnetic field): 100A/m continuous;
1000A/m ,1s to 3s IEC61000-4-9 (pulsed magnetic field): 1000A/m IEC61000-4-10 (damped oscillation): 30A/m 1MHz IEC61000-4-12/18 (Shock Wave): CM 2.5kV, DM 1kV IEC61000-4-16 (common mode conduction): 30V continuous; 300V,1s FCC Part 15/CISPR22(EN55022):Class A IEC61000-6-2 (General Industrial Standard) |
mechanical properties | IEC60068-2-6 (Anti-vibration) IEC60068-2-27 (Impact resistance) IEC60068-2-32 (Free Fall) |
Safety certification | CE,FCC,RoHS,CCC |
Warranty period | 5 years |
Ordering Information
device name | Equipment information | Suggested supporting power supply |
LNK-GY216M | L2+ network management type 16 10/100/1000M network ports+2 Gigabit
uplink SFP optical port slots, industrial Ethernet switches,
support dual DC redundant power input (Phoenix terminal
connection), and support rail installation. | DC24V/1A |
Note: The power supply and SFP optical module are not matched by
default. If you need to match them, please contact your dealer or
business manager. |
