DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender
Model: LNK-DEC110 Series
Overview
The LNK-DEC110 Series DIN-Rail Ethernet over Coaxial Converter is a
new designed Ethernet
Extender Device. This Device is designed to extend Ethernet Network
signal and Power over existing
coaxial cable, and able to live transmit multi-channel Power +
Network date signal, the Max distance
is up to 1200M(Power: 300M). 2pc BNC design supports to connect 2
channel branch lines at same
time. The total power of electricity is 100W, each BNC max is 50W.
Network max baud-rate is up to
100Mbps. It has excellent lightning protection and
Anti-interference.
Inbuilt Industry level intelligent auto-monitoring module (this
function is optional), this function can
make the device intelligent detect circuit individually, all time
automatically detect network communication
link exceptional situation. If any link is abnormal, it make the
device recover to link the communication
automatically, ensure the network communication link data
transmission stably. Really realize never loss
network connection, never crash industry network transmission.
Guarantee the security of surveillance zone.
These series products are widely used in CCTV surveillance and
remote network extension.
Features
► Transmit 10/100 Mbps Full Duplex Ethernet up to 1200m (without
PoE) or 300m (with PoE)
► Transmission Media: Coaxial Cable(Best), 586B, CAT5e/6
► Input Voltage: DC18V~48V (POE: DC48V).
► Support Power over Coax & Power over Ethernet at same time.
► 2pc BNC design, support to connect Max. 7 channels branch line
► Operation: Use the existing network, easy to install, Plug &
Play. Convenient and efficient.
► Code Standard: abide by IEEE802.3 10/100 base-TX Ethernet
standard protocol
► Advanced 128-bit AES encrypted transmission and PoE+ power
technology
► Excellent Protection: Built-in transient protection; industrial
temperature range. Excellent lightning protection and strongly
Anti- interference, surge protection.
Technical Indexes
| Ethernet |
| Standards | IEEE802.3 10Base-T |
| IEEE802.3u 100Base-TX |
| IEEE802.3af Power Over Ethernet |
| IEEE802.3at Power Over Ethernet |
| Cabling | 10Base-T: Cat 3,4,5, or above |
| 100Base-TX: Cat5 or above |
| Maximum Distance | Cat5UTP up to 100m |
| Connector | 1 x RJ45 |
| Coaxial |
| Cabling | Coaxial Cable (75 ohm) |
| Connector | 1 BNC (female) |
| Distance | Up to 1200m (no PoE), 300m (with PoE) |
| Data Rate |
| Downlink (TX to RX) | 90Mbps (Max.) |
| Uplink (RX to TX) | 90Mbps (Max.) |
| Technology | Power Line Communication (PLC) |
| Protection |
| Reverse Polarity | Present |
| Electrical and Mechanical |
| Input Power | DC18V~48V (PoE: DC48V) |
| Power Consumption | 8W Max. (PoC not in use) |
| 60W Max. (Poc in use) |
| LED Indicators |
| Power (Power) | RED (Power On: keep lighting; Power Off: lighting off) |
| Coax (Cable Link) | GREEN (Flicker: signal transmission) |
| Ethernet | SPD, LINK/ACT, PoE(Transmitter) |
| PoE |
| Standard | IEEE802.3af/at |
| Mode | B Mode |
| Port | RJ45 |
| Max. Power Per Port | 25.5W max.at RX(Powered Device) |
| 30W Max.at TX(Power Souring Equipment) |
| Mode | Positive(VCC+): RJ45 Pin 4,5 |
| Negative(VCC-):RJ45 Pin 7,8 |
| Dimensions (W x D x H) | 95 × 67 × 30 mm |
| Weight | 0.5kg |
| Casing | Aluminum case |
| Environmental |
| Operation Temperature | -10˚C to 60˚C (14˚F to 140˚F) |
| Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
| Relative Humidity | 5% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | ISO9001 FCC Part 15 Class A EN55022 Class A Surge Protection RJ45: 1KV BNC: 2KV Power: 500V |
Application
Ordering lnformation
| Model | Description |
LNK-DEC110-T/R | DIN-Rail EoC Converter, 1200m transmission distance, including
Transmitter and Receiver, not including power supply adapter |
LNK-DEC110P-T/R | DIN-Rail EoC Converter with PoE+, 300m transmission distance,
including Transmitter and Receiver, not including power supply
adapter |
