Industrial IEEE802.3af/at PoE Splitter with 2-port switch function, output voltage 12VDC
Overview
The LNK-SPL01 is an industrial-grade Gigabit Ethernet PoE splitter designed to provide data and power to
non-PoE devices. It transmits data via an RJ45 connector and
outputs power (12VDC) via a terminal block,
enabling network and power transmission up to 100 meters, saving cabling costs. Compliant with
IEEE802.3af/at standards, the device can be powered by a PoE switch or the LNK-INJ301
injector.
It supports dual power input (PoE and 12VDC), automatically
switching when PoE becomes unavailable,
ensuring high reliability. Equipped with two RJ45 data output
ports, the LNK-SPL01 can function
as a small switch. Easy to install, requiring no additional
configuration, it is ideal for industrial applications.
Features
► Splits power and data from PoE Input
► 1-port PoE Power+ Data input
► 2-port Data output (Switch function)
► 1 DC Out + 1 DC In (5-pin Terminal Block)
► Able to work with 12VDC input no PoE
► Support IEEE802.3af/at PoE
► Support 10/100/1000Base-TX
► Distance up to 100 meters
► Supports output power up to 20W
► 12VDC output voltage
► Short-circuit protection for power output
► IP40 rugged metal housing and fanless
► Support DIN-Rail & Wall-mount installation.
► Extensive LED indicators for PoE diagnostics
► Wide operating temperature -40 ~ 80°C
Technical Indexes
| Ethernet |
| Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet |
| IEEE802.3af Power over Ethernet |
| IEEE802.3at Power over Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 1000Base-T: Cat5 or above |
| Maximum Distance: | Cat5 UTP up to 100m |
| Interface: | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T |
| “Data” Out Port: 2 x RJ-45 10/100/1000Base-T |
| DC Out/In Plug Connector: 1 removable 5-Pin terminal block |
| Power over Ethernet |
| PoE Standard: | IEEE 802.3af/at Power over Ethernet |
| Number of devices that can be powered: | 1 (DC12V) (Vary on device’s power requirement; cannot be over 20 watts.) |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Power Output: | 20W 12VDC (Terminal Block) |
| Power Consumption: | 25W Max. |
| LED Indicators: |
| PWR: | Power ON |
| POE/12V: | PSE Power IN, 12VDC Power OUT |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.25Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500W |
| ESD: 4KV/8KV |
Interface & Panel
Ordering Information
| Model | Description |
| LNK-SPL01 | Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In + 2-port Ethernet Data Out (switch function), maximum output of 20 W at 12VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to
80°C operating temperature |
| Mounting Options | Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |
| Power Options | 20W 12VDC output with 2-pin open wire terminal block |
Application
