The slip ring body shall not be used for bearing, and the wire
shall not be subjected toexternal pulling force;
When installing the slip ring, the rotor and the stator can not be
hard-wired. It isrecommended to fix the slip ring on the rotating shaft with four
set screws, insert therotation-proof piece into the rotation-proof piece, and comb the
wire to avoidinterference or breakage of the wire;Slip rings are precision electrical components. If the environment
is harsh, addprotective measures or use a custom-made slip ring with a higher
degree of protection.
A slip ring is an electromechanical device that allows the
transmission of power and electrical signals from a stationary to a
rotating structure. A slip ring can be used in any
electromechanical system that requires rotation while transmitting
power or signals. It can improve mechanical performance, simplify
system operation and eliminate damage-prone wires dangling from
movable joints.
Signal Slip rings (USB2.0/USB3.0 slip ring,fiber optic rotary
joint,high frequency slip ring,etc)
Pneumatic/Hydraulic Rotary Unions
Custom Slip Rings
Large volume series
4. How do I choose a slip ring?
Proper selection of a slip ring solution requires details about
your application’s operating parameters including total circuits,
voltage and amps per circuit, operating speed, and mounting type.
If you are confident that a custom / modified solution is most
likely required or need assistance in your selection, contact us to
Get Started.
Yes, if you are confident that a custom / modified solution is most
likely required or need assistance in your selection, contact us to
Get Started. Our engineers will come up with perfect solution for
your needs.
JINPAT Electronics, founded in 1996, is a national high-tech
enterprise specializing in R&D, manufacturing and sales of
high-precision slip rings. Typical products like Capsule Slip Ring,
Through-bore Slip Ring, Large-current Slip Ring, Coax
Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin
Slip Ring.
Besides, customization is supported to cater to the different
application in that slip ring can be designed exclusively
integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple,
RS232, RS422 and so forth.
