Roll Wrapped Carbon Fiber Tube 10x8x600mm 3K Twill Matte Finish

Carbon Fiber Tube 10x8x600MM,10~50MM Available, 3K Roll Wrapped Twill Matte Finish

Carbon Fiber Roll-Wrapped Tubes

By rolling several layers of carbon fiber fabric around a mandrel, carbon fiber roll-wrapped tubes can be produced. Strength and stiffness are provided to the tube from both sides by the layers that run in different directions. The tube is subsequently cured after wrapping. Because the fibers are layered in multiple directions, carbon fiber roll-wrapped tubes are very strong and stiff. They can bear multidirectional forces; hence, they have high feasibility of application in strength-critical applications. These properties make roll-wrapped tubes suitable for most work carrying a bike frame, a camera rig, an aircraft part, etc. But carbon fiber roll-wrapped tubes are somewhat more complicated to manufacture than other sorts of carbon fiber tubes, which is why they are occasionally a little more costly.

Our roll-wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill/plain carbon fiber prepregs around a metal mould and then cured at high temperature. The UD prepregs are used in core layers, whereas the Twill/Plain is on the surface. Based on your requirement, we can also use Kevlar and glass fiber.

Our Roll Wrapped Carbon Fiber Tube is manufactured using a multi-layer wrapping process with unidirectional and woven carbon fiber fabrics, then cured with high-performance epoxy resin under heat and pressure. This method ensures excellent strength, uniform wall thickness, and superior performance in both axial and radial directions.

Compared to pultruded tubes, roll-wrapped tubes offer greater strength and durability, especially in bending and torsional applications. These tubes are ideal for high-performance structural uses such as drone arms, telescopic poles, robotic systems, and automotive or aerospace components.

Common Applications of Carbon Fiber Tube

• Aerospace beam and spars
• Telescopes
• Arrows
• Robotics
• Arrow Shafts
• Bicycle frames
• Kayak paddles
• RC models
• Yachts

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.