ISO 8787 Permeability Tester DIN 53924 Penetration Height Gauge
Fabric Water Absorption Rate Test Machine
Instroduction
The instrument is designed with the latest technology and is used
to measure the height to which the liquid rises after the sample is
immersed in water.
The operation of the instrument is simple. Place the test material
vertically on the instrument, submerge its lowest end in water, and
measure after 10 minutes. Based on the height of the liquid rise,
the water absorption speed of the material can be determined.
Compliant with standards
DIN 53924 Textile testing. Determination of fabric water absorption
rate (capillary absorption height method)
ISO 8787 Tests for paper and paperboard. Determination of capillary
rise
TAPPI T 441 Water absorption, non-absorbent sized paper, paperboard
and corrugated board
Instrument Characteristics
(1) The instrument is easy to operate, has an attractive appearance
and is highly corrosion-resistant.
(2) It can accommodate 6 test strips, with a measurement length of
250mm ± 2mm, a measurement width of 30mm ± 2mm to 50mm, and an
immersion depth of 25mm.
(3) The measuring bar can be adjusted in the vertical pillar.
(4) The transparent glass flat-bottomed vessel is used to hold the
test liquid.
(5) The clips on the horizontal pillar (with a maximum width of
50mm) are used to fix the sample.
(6) The measuring rod is vertically fixed on the bar within the
range of millimeters.
(7) The timer and alarm device can display the time down to
seconds.
Technical Specification
Scale quantity | 6 |
Measurement range | 0 - 250mm |
Scale graduation value | 1mm |
Sample width | Maximum 50mm |
Number of samples measured simultaneously | 6 pieces |
