DM6100 Model X-ray thickness gauge Thickness gauge utilizing X-ray
technology
Description:
The DM6100 X-ray thickness gauge can be used for measuring the
thickness of various plastic films, rubber, wood, cardboard, metal
sheets, etc. in various industries. It is mainly used in the metal
rolling industry to measure the thickness of products on the
production line, such as steel strips, copper strips, aluminum
strips, aluminum foils, etc. in a dynamic state. It can output the
thickness signal to the AGC system to achieve closed-loop thickness
adjustment. It has the advantages of non-contact with the measured
object, continuous measurement, rapid measurement, and accurate
measurement.
The DM6100 X-ray thickness gauge uses an X-ray tube as the X-ray
source. Compared with the majority of X-ray thickness gauges
currently available in China that use isotope radiation sources as
X-ray sources, it has significant advantages. Firstly, it
eliminates the complex approval procedures, high management costs,
and especially the cost of repurchasing the radioactive source when
the instrument is scrapped associated with the use of isotope
radiation sources. Secondly, this thickness gauge adopts the unique
source control technology developed by our company. Its X-ray
source's energy and intensity can be continuously adjusted,
ensuring that each thickness within the maximum measurement range
achieves the best measurement accuracy. In contrast, isotope
radiation sources usually have only one energy level and can only
guarantee the best measurement accuracy for a certain thickness.
At present, the vast majority of X-ray thickness gauges produced in
China use isotope radiation sources as X-ray sources. While X-ray
thickness gauges using X-ray tubes as X-ray sources are mainly
imported large-scale equipment, which are very expensive. Although
a few domestic enterprises have started to produce them in recent
years, their market share is limited and the prices are also high.
The DM6100 type X-ray thickness gauge is a small-sized thickness
gauge that uses a small X-ray tube as the X-ray source. Although
its performance is slightly inferior to the imported products, the
price is much lower than that of the imported products and also
lower than those of domestic counterparts. It is only similar to
the thickness gauges using isotope radiation sources as X-ray
sources, but its performance is much higher than those using
isotope radiation sources as X-ray sources.
The launch of the DM6100 X-ray thickness gauge enables small and
medium-sized enterprises in China that previously needed thickness
gauges to also use X-ray thickness gauges with X-ray tubes as the
radiation source. This provides users with a new and more optimized
option. By replacing X-ray thickness gauges with isotope radiation
sources with the DM6100 X-ray thickness gauge, users will not only
significantly improve product quality due to the enhanced
performance, thereby bringing substantial economic benefits to
users, but also improve the environmental protection level in the
country by eliminating the use of isotope radiation sources, thus
bringing great social benefits to the country.
We believe that the DM6100 type X-ray thickness gauge will
undoubtedly replace the X-ray thickness gauges that use isotope
radiation sources as their radiation sources in the near future,
and will become the dominant player in the X-ray thickness gauge
market.
Characteristics
It does not contain radioactive isotopes, has no pollution from
three types of waste, and eliminates the troubles and costs for
users.
2.Continuous non-contact measurements, when connected to the AGC
system, enable closed-loop control of the thickness.
3.Large screen with Chinese display, cold cathode backlighting LCD,
clear and bright characters.
4.High degree of integration, strong environmental adaptability,
strong anti-interference ability and high reliability.
5. High measurement accuracy, fast response speed and good
stability.
6.The operation is convenient and fast, with minimal maintenance
and debugging workload.
7.It has self-diagnosis, error-operation alert, automatic
calibration and compensation functions.
8.The shielding protection is excellent, ensuring compliance with
radiation safety requirements.
9.The price function is relatively simple, which is suitable for
the national conditions of our country.
Technical Parameters
Parameter | Specification |
1. Measurement Range | • Steel: 0.1 mm – 4.0 mm
• Aluminum: 0.01 mm – 10.0 mm |
2. Strip Speed | 0 – 27 m/s |
3. Resolution | 0.001 mm |
4. Measurement Accuracy | ±0.2% |
5. Response Time | 100 ms (63% step response for 5% thickness variation) |
6. Sampling Period | Selectable: 200 ms, 400 ms, 600 ms, 800 ms |
7. Measurement Noise | 0.12% |
8. Repeatability | 0.2% |
9. Drift | • Long-term drift: <±0.24% per 8 hours
• Short-term drift: <±0.2% per hour |
10. Warm-up Time | 1 hour after X-ray source activation |
11. Auto-calibration Time | ≤20 minutes |
12. Material Compensation | • Range: 0–15%
• Alternative: Multi-alloy calibration curves |
13. Operating Conditions | • Temperature: 0–40°C
• Humidity: ≤95% RH (at 30°C)
• Power: 220V±20V, 50Hz |
14. Power Consumption | ≤250 W |
15. Dimensions & Weight | • Control Console: 470mm(W)×365mm(D)×160mm(H), 15kg
• C-Frame: 673mm(W)×579mm(D)×189mm(H), 35kg |
