Industrial L2+ 24-Port 10/100/1000T + 4-Port 1000X SFP Managed Ethernet Switch
Overview
The ETH-DIMC2424M Series is an industrial-grade L2+ managed
Ethernet switch designed for
high-density network deployments in demanding environments.
Featuring 24× 10/100/1000Base-T(X)
copper ports and 4× 1000Base-X SFP fiber slots, this rugged switch
delivers exceptional connectivity
and performance for industrial applications.
Key Features:
- High port density: 24× auto-negotiating Gigabit Ethernet ports
with Full/Half duplex and auto
MDI/MDI-X support
- Flexible fiber uplinks: 4× SFP slots compatible with
single-mode/multi-mode (1/2 core) modules
- Advanced L2+ management: Comprehensive features including VLAN,
QoS, security, and network
monitoring
- Industrial durability: Designed for reliable operation in extreme
conditions (-40°C to +75°C)
Ideal Applications:
✓ Large-scale industrial automation systems
✓ High-density IP surveillance networks
✓ Enterprise wireless access point deployments
✓ Remote site connectivity with fiber backhaul
✓ Mission-critical infrastructure requiring hardened equipment
With its combination of high port count and fiber connectivity, the
ETH-DIMC2424M Series provides a
scalable solution for networks requiring both copper access and
fiber backbone capabilities. The
switch's industrial-grade construction ensures reliable performance
in harsh environments, while its
advanced management features enable precise network control and
optimization. This makes it
particularly suitable for applications where network reliability,
scalability, and remote management
are critical requirements.
Features
► 10K Bytes Jumbo Frame
► IEEE 802.3az Energy Efficient Ethernet (EEE)
► IP40 Aluminum Case
► Supports DIN-Rail installation
►-40°C to 80°C (-40°F to 176°F) operating
► Support 24x10/100/1000Base-T + 4x1000Base-X SFP
► 10/100/1000Mbps RJ45 Port supports Full/Half-duplex,
Auto-negotiation, Auto MDI/MDIX
► Support connecting USB-C port for easy management, without the
need to access the RS232
serial port at all
Application
Technical Indexes
| Ethernet |
| Standards: | IEEE802.3 10BASE-T |
| IEEE802.3u 100BASE-TX/FX |
| IEEE802.3ab 1000BASE-T |
| IEEE802.3z 1000BASE-X |
| IEEE802.3p QoS |
| IEEE802.1d Spanning Tree |
| Forward & Filtering Rate: | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Packet Buffer Memory: | 12M bits |
| Processing Type: | Store-and-Forward |
| Backplane bandwidth | 110Gbps |
| Max Packet Length: | 10K Bytes Jumbo Frame |
| Address Table Size: | 8K MAC Addresses |
| Interface |
| Connector: | 24 x RJ45 |
| RS485: | 1 x RS485 (Optional) |
| Optical Port: | 4 x 1000Base-X SFP |
| USB-C: | 1 x USB-C (for Management) |
| RS485 Serial Interface (Optional) |
| Physical interface | Industrial standard 3-pin screw terminal |
| Data type | 1Ch RS485 Bi-Direction |
| RS-485 signals | Data+, Data-, GND |
| Serial port line distance (copper) | 1000 meters |
| Baud rate | 0 ~ 800kbps |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
| Electrical and Mechanical |
| Input Power: | 12~48VDC, Redundant Power (6-pin Terminal Block) |
| Power Consumption: | 8W Max |
| Protection: |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| DIP Switch |
4-digit DIP switch function | DIP | Function | Settings |
| SW 1 | VLAN | ON - Enabled | OFF - Disabled |
| SW 2 | Ring Management | ON - Enabled | OFF - Disabled |
| SW 3 | Reserved | ON - Reserved | OFF - Reserved |
| SW 4 | Reserved | ON - Reserved | OFF - Reserved |
| LED Indicators: |
| PWR: | Power Status |
| Ethernet (Per Port): | Link/Activity |
| RJ45 Port | (T1~T24) |
| Fiber: | Gigabit SFP Port: F25~F28 |
| Dimensions (WxDxH): | 155 x 115 x 85 mm |
| Weight: | 1.2KG |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
| Software Features |
| Redundancy Protocols | Support STP/RSTP/MSTP/ERPSv2, Link Aggregation |
| Multicast Support | Support IGMP Snooping V1/V2/V3,support GMRP, GVMP,802.1Q |
| VLAN | Support IEEE 802.1Q 4K VLAN,support QINQ, Double VLAN, |
| Time Management | SNTP |
| QOS | Flow-based redirection Flow-based rate limiting
Flow-based packet filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
| ACL | Port-based Issuing ACL ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source,
Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range,
and VLAN, etc |
| Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
| Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE,
LLDP, DHCP Server/Client(IPv4/IPv6), Cloud/MQTT |
| Alarm Management | Support 1 way relay alarm output, RMON, TRAP |
| Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 Support DHCP Snooping, Option 82,802.1X security access,
Support user hierarchical management, ACL access control list,
Support DDOS,port-based MAC filtering / binding, MAC black holes,
IP source protection, Port isolation, ARP message speed limit |
| Advance Layer 2+ Features | IPv4/IPv6 Management Static Route |
| Regulatory Approvals |
| ISO9001, CE, RoHS, FCC |
| EN55022:2010+AC: 2011, Class A |
| EN 61000-3-2: 2006+A1: 2009+A2: 2009 |
| EN 61000-3-3: 2013 |
| EN55024:2010 |
| IEC 61000-4-2: 2008 (ESD) |
| IEC 61000-4-3: 2010 (RS) |
| IEC 61000-4-4: 2012 (EFT) |
| IEC 61000-4-5: 2014 (Surge) |
| IEC 61000-4-6: 2013 (CS) |
| IEC 61000-4-8: 2009 (PFMF) |
Ordering Information
| Model | Description |
| ETH-DIMC2424M | Industrial L2+ 24-Port 10/100/1000T + 4-Port 1000X SFP Managed
Ethernet Switch |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. |
| Mounting Options | ► Default DIN-Rail Bracket installed |
| Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
| ► Power Supply is to be purchased separately. |
