Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Features
► Support 24x10/100/1000Base-T + 4x1000Base-X SFP
► 10/100/1000Mbps RJ45 Port supports Full/Half-duplex,
Auto-negotiation, Auto MDI/MDIX
► IEEE802.3af/at compliant
► DIP Switch supports one-key VLAN, one-key Ring Management, PoE
Reset and 250m PoE Network
► Support connecting USB-C port for easy management, without the need
to access the RS232 serial port at all
► 10K Bytes Jumbo Frame
► IEEE 802.3az Energy Efficient Ethernet (EEE)
► IP40 Aluminum Case
► Supports DIN-Rail installation
► -40°C to 80°C (-40°F to 176°F) operating temperature
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Overview
ETH-DIMC2424MP series is the L2+ managed 24-port 10/100/1000Base-T 802.3at PoE + 4-port
1000Base-X SFP hardened Ethernet switch. The switch has 24 TP ports
and 4 fiber ports. The TP (RJ45) supports 10/100/1000Base-T(X),
Full/Half duplex mode, and auto MDI/MDI-X connection; the
1000Base-X SFP port supports 1 or 2 core Single-mode or Multi-mode
fiber. With its reliable design and ease of use, the product is a
great choice for integrating networks consisting of network devices
such as IP cameras and wireless access points between remote
locations.
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Technical Indexes
Ethernet |
Standards: | IEEE802.3 10BASE-T |
IEEE802.3u 100BASE-TX/FX |
IEEE802.3ab 1000BASE-T |
IEEE802.3z 1000BASE-X |
IEEE802.3p QoS |
IEEE802.1d Spanning Tree |
Forward & Filtering Rate: | 14,880pps (10Mbps) |
148,800pps (100Mbps) |
1,488,000pps (1000Mbps) |
Packet Buffer Memory: | 12M bits |
Processing Type: | Store-and-Forward |
Backplane bandwidth | 110Gbps |
Max Packet Length: | 10K Bytes Jumbo Frame |
Address Table Size: | 8K MAC Addresses |
RS485 Serial Interface (Optional) |
Physical interface | Industrial standard 3-pin screw terminal |
Data type | 1Ch RS485 Bi-Direction |
RS-485 signals | Data+, Data-, GND |
Serial port line distance (copper) | 1000 meters |
Baud rate | 0 ~ 800kbps |
PoE (Power over Ethernet) |
Standard: | IEEE 802.3at Power over Ethernet Plus |
IEEE 802.3af Power over Ethernet |
Port: | RJ45 |
Power Pin Assignment | 4/5(+), 7/8(-) |
PoE Budget: | Up to 720-watt PoE budget |
DIP Switch |
4-digit DIP switch function
| DIP | Function | Settings |
SW 1 | VLAN | ON - Enabled | OFF - Disabled |
SW 2 | Ring Management | ON - Enabled | OFF - Disabled |
SW 3 (to be upgraded) | 250m PoE Network | ON - Enabled | OFF - Disabled |
SW 4 (to be upgraded) | PoE Reset | ON - Enabled | OFF - Disabled |
LED Indicators: |
Power: | Power Status |
Ethernet (Per Port): | Link/Activity |
PoE | PoE Status (T1~T24) |
Fiber: | Gigabit SFP Port: F25~F28 |
Dimensions (WxDxH): | 155 x 115 x 85 mm |
Weight: | 1.2KG |
Casing: | Aluminum Case |
Mounting Options: | DIN-Rail mount |
Software Features |
Redundancy Protocols | Support STP/RSTP/MSTP/ERPSv2, Link Aggregation |
Multicast Support | Support IGMP Snooping V1/V2/V3,support GMRP, GVMP,802.1Q |
VLAN | Support IEEE 802.1Q 4K VLAN,support QINQ, Double VLAN, |
Time Management | SNTP |
QOS | Flow-based redirection Flow-based rate limiting
Flow-based packet filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
ACL | Port-based Issuing ACL ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source,
Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range,
and VLAN, etc |
PoE Management | Total power limit of PoE power supply PoE output power allocation
PoE output priority configuration
PoE working status
Scheduling of PoE operation |
Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE,
LLDP, DHCP Server/Client (IPv4/IPv6), Cloud/MQTT |
Alarm Management | Support 1 way relay alarm output, RMON, TRAP |
Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 Support DHCP Snooping, Option 82,802.1X security access,
Support user hierarchical management, ACL access control list,
Support DDOS,port-based MAC filtering / binding, MAC black holes, IP source
protection, Port isolation, ARP message speed limit |
Advance Layer 2+ Features | IPv4/IPv6 Management Static Route |
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Ordering Information
Model | Description |
ETH-DIMC2424MP | Industrial L2+ 24-Port 10/100/1000T 802.3at PoE + 4-Port 1000X SFP
Managed Ethernet Switch |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
► SFP module is to be purchased separately. |
Mounting Options | ► Default DIN-Rail Bracket installed |
Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
► Power Supply is to be purchased separately. |
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Application Picture
Industrial L2 Ethernet Switch Managed 24-Port PoE 4-Port SFP 10K
Bytes Jumbo Frame Pictures
