Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function Advantages
► Transparent Transport and very low delay
► 3R function (Regeneration, Reshaping, Re-timing)
► Support hot plugging, full state led display, easy installation
► Support ITUT prescribed DWDM/CWDM wavelength, and can also display
it’s DDM function
► Support Loop-back and Jumbo Frame
► DIP Switch supports 1.25G/10G fiber data rate switching
► Can be as 1G Ethernet Media Converter if using Ethernet
► IP40 Aluminum Case
► Supports DIN-Rail/Wall-Mount installation
► -40°C to 80°C (-40°F to 176°F) operating temperature
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function Overview
ETH-IMC2402-OEO series Industrial 10G OEO Converter is a connection between fiber to fiber
10Gbps equipment function as fiber media converter, or as fiber
repeater for long distance transmission in harsh environment at
operating temperature -40~ 80℃.
It is for network backbone (SAN, LAN, MAN) application. Support
SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet, which can
be applied in R&D laboratory, data center, telecommunication
room. It supports optical wavelength conversion
1310nm/1550nm/CWDM/DWDM with Loop-back.
When only connecting the copper and fiber port, it can be
connection between fiber to copper 1Gbps Ethernet equipment
function as fiber-to-copper media converter for long distance
transmission up to 120km.
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function Technical Indexes
Ethernet Media Converter Specifications |
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x Full-duplex flow control |
Work Mode | 10/100/1000BASE-T to 1000BASE-SX/LX |
Port Type | SFP to RJ45 |
Network Cables | Twisted-pair
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100m
1000BASE-T: 4-pair STP Cat 5 up to 100m Fiber-optic Cable
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km.
1000BASE-LX:
9/125μm single-mode cable, providing long distance for 10/20/40/80/120km
(vary on SFP module) |
Electrical and Mechanical |
Input Power | 12~48VDC, Redundant Power (6-pin Terminal Block) |
Power Consumption | 8W Max |
Protection |
Power Input Overload | Automatic Resettable |
Reverse Polarity | Present |
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function ordering information
Model | Description |
ETH-IMC2402-OEO | Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
► SFP module is to be purchased separately. |
Mounting Options | ► Default DIN-Rail Bracket installed |
Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
► Power Supply is to be purchased separately. |
