LPT series are through-bore slip rings (the center hole can pass
through the drive shaft, gas-liquid passage; it canalso integrate high frequency, fiber, encoder, waveguide, gas and
liquid and other joints). The use of advanced fiberbrush ensures reliable contact under extremely low friction. The
center hole is available from 0 to 1000mm. The currentis from mA to 5000 amps. The voltage can be up to 10000 volts,
which can fully meet different needs of transmission.
Features:
Transmit analog and digital signal
The power and signal are mixed transmitted, and the signal
categories are as follows:
Ethernet: Rate (10Mbps/100Mbps/1000Mbps)
Industrial Ethernet: EtherNet , EtherCAT ,ProfiNet, Powerlink ,
SercosIII/IP, etc.
HD video: SDI, LVDS, etc.
Serial communication: RS232, RS485, RS422, etc.
Universal Serial Bus: USB2.0
Industrial Fieldbus: CANBus,ProfiBus, InterBus, CC-Link, DeviceNet,
etc.
Sensor signal: thermal resistance, thermocouple, strain gauge, etc.
A slip ring is an electromechanical device that allows the
transmission of power and electrical signals from a stationary to a
rotating structure. A slip ring can be used in any
electromechanical system that requires rotation while transmitting
power or signals. It can improve mechanical performance, simplify
system operation and eliminate damage-prone wires dangling from
movable joints.
Signal Slip rings (USB2.0/USB3.0 slip ring,fiber optic rotary
joint,high frequency slip ring,etc)
Pneumatic/Hydraulic Rotary Unions
Custom Slip Rings
Large volume series
4. How do I choose a slip ring?
Proper selection of a slip ring solution requires details about
your application’s operating parameters including total circuits,
voltage and amps per circuit, operating speed, and mounting type.
If you are confident that a custom / modified solution is most
likely required or need assistance in your selection, contact us to
Get Started.
Yes, if you are confident that a custom / modified solution is most
likely required or need assistance in your selection, contact us to
Get Started. Our engineers will come up with perfect solution for
your needs.
JINPAT Electronics, founded in 1996, is a national high-tech
enterprise specializing in R&D, manufacturing and sales of
high-precision slip rings. Typical products like Capsule Slip Ring,
Through-bore Slip Ring, Large-current Slip Ring, Coax
Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin
Slip Ring.
Besides, customization is supported to cater to the different
application in that slip ring can be designed exclusively
integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple,
RS232, RS422 and so forth.
