SS316 Material Explosion Proof Fluorescent Light – Full Plastic Linear Fixture, 3ft/5ft, 6000K, CRI ≥70 for Hazardous Areas

CCT6000K CRI>70 Explosion Proof Fluorescent Light Linear tube light fixtures

Features
1. The light source uses a well-known brand, which has the characteristics of higher light, high color rendering and energy-saving environment, which is more in line with the actual lighting environment, and the export illuminance of the light box is greater than 15000LX;
2. The shell is stamped and formed by 1.2mm steel plate, and the surface is polished and cleaned at high speed. It has good anti-explosion and anti-corrosion performance, stainless steel exposed fasteners, and beautiful appearance;
3. The sealing ring is made of high temperature resistant and anti-aging silicone rubber, which has good dustproof and waterproof performance;
4. Adopt a special structure, quickly replace the light source, install and maintain fast and convenient
5. The wire is introduced into the wiring cavity through the lead-in device, and there are grounding screws inside and outside the shell, and the user must be reliably grounded when using it;

Use environment and purpose
1. The altitude does not exceed 2000m;
2. The working environment temperature is generally -20℃~ +40C;
3. The relative temperature of Zhouguo air is not more than 95% (+25C);
4. Zones 1 and 2 contain explosive gas atmospheres of groups I1A~NIB inflammation T1-T6, or zones 20, 21, and 22 flammable powder in the environment;
5. In a place where there is no significant shaking, impact or vibration;
6. In the environment of gas or steam that does not damage the insulation;
7. Pollution degree: Level 3;
8. Installation category: Type II