Product Description:
FS0001 Ultrasonic Flowmeter Has A Measurement Range Of 1.5 - 3000
L/h And Is Used In Water Management Systems
Features:
Ultrasonic flowmeter is a pipe segment-type ultrasonic flow sensor
that can directly output digital flow signals. It measures flow by
measuring the time difference between the forward and backward
propagation of ultrasonic waves. It consists of a pair of
master-slave connected ultrasonic flow sensors and a measurement
pipe segment. It integrates a circuit module for processing the
time difference signal of ultrasonic wave propagation and outputs
instantaneous flow, total flow, and water flow status as digital
information through a serial port. It is mainly applied in home
intelligent water management systems, leak detection, and
intelligent irrigation systems. Product features
Special engineering plastic one-piece molded pipe body, with high
strength and good consistency.
The measurement accuracy is as high as 2%, unaffected by the
viscosity and conductivity of the medium.
The range ratio can reach up to 160.
Passed the national drinking water hygiene grade certification in
accordance with the GBT17219 standard.
Digital signal output, M-BUS protocol communication
Product performance
Project Parameters
Pipe diameter 15 DN
Measurement range 1.5 - 3000 L/h Precision
25~35°C: ≤±2%
Others: ≤±3%
Working voltage: 3.1 - 3.7V
Withstand pressure: 1.6 Mpa
Operating temperature: +0.1℃ to +50℃ Product Application
- Home intelligent water management system
- Leak detection
- Intelligent irrigation system
- Industrial equipment water management system
Specifications:
| Project | Parameters |
| Pipe diameter | 15 DN |
| Measurement range | 1.5 - 3000 L/h |
| Precision | 25~35°C: ≤±2% |
