Mini Industrial 10BASE-T to 10BASE-FL Ethernet Media Converter
Advantages
► Auto-MDI/MDIX
► Complies with 802.3 10Base-T and 10Base-FL standards
► Extends network span from up to 2km(Multi mode)
► Interoperable with other 10Base media converters, 10Base, 10Base-T
NICs, hubs or switches
► Provides LEDs for easy network monitoring
► Supporting Quality of Service (QoS), ensuring the transmission of
VoIP packets
► Supports 802.3x Flow control
► IEEE 802.3az Energy Efficient Ethernet (EEE)
► Supports Wall-mount and DIN-Rail installation
► -40°C to 80°C (-40°F to 176°F) operating temperature.
Overview
E-link Mini Industrial 10Base-T Ethernet to 10Base-FL fiber optical
media converter converts your existing 10Base-T Ethernet to a
10Base-FL network with single mode or multimode fiber optic cable
up to 20,000 meters.It’s a hardened product with wide operating temperature range from
-40°C to 75°C, and ruggedized aluminum housing. The Ethernet port
supports both half-duplex and full-duplex mode. The rugged hardware
design ensures that your Ethernet equipment can withstand demanding
industrial conditions. The LNK-IMC10FST Series are easy to mount on
a DIN rail or in distribution boxes.
Connect 10 Mbps Ethernet segments to fiber segments without using
crossover cables. With a E-link 10Mbps Media Converter, you no
longer have to deal with mismatched transmit and receive cable
pairs. This converter contains a switch that senses the type of
circuit connected to the UTP port and automatically configures the
port to match. Because the UTP side is autosensing to MDI/MDI-X,
you can use either a straight or crossed cable to connect a switch
or NIC.
Picture
Application
Ordering Information
Model | Description |
LNK-IMC10FST-MM | Mini Industrial 10BASE-T to 10BASE-FL Ethernet Media Converter,
multi-mode, 2km, 850nm, ST |
Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
Power Options | ► 24W/1A 24VDC Power Supply. Open Wire for Terminal Block |
► Power Supply is to be purchased separately. |
