Self Elevating 25 KG Powder Packing Machine
Brief description and characteristics
BH-SJS-FM25 is a mechatronics product. It is mainly composed of
electronic weighing control system, material box, electric control
system and pneumatic circuit.
A. The powder packaging machine can automatically complete the work
of entrainment, lifting, feeding, door opening, weighing, loosing
bag, and out-of-tolerance alarm.
B. Weighing instrument control, (Chinese and English switching)
operation is simple and convenient. Various product adjustment
parameters can be stored, and up to 5 recipes can be stored.
C. Vertical screw feeding has the advantages of high precision,
small dust, and easy cleaning of the silo. It is especially
suitable for industries with high requirements such as
pharmaceuticals.
D. It has the characteristics of perfect detection and control
functions, reliable work, high measurement accuracy, simple
operation and convenient maintenance.
E. The servo motor controls the screw feeding in three stages to
ensure accuracy and speed.
F. There are industrial sewing machine, overlock sewing machine,
folding sewing machine, pneumatic heat sealing machine, 3 in 1 heat
sealing machine, ink wheel sealing machine.
Technical Parameters
Model | BH-SJS-FM25 |
Packing Accuacy | ±0.01%—0.2% (according to the material characteristic) |
Packing Speed | 1-3 bags/min( according to material characteristic and accuracy
requirement) |
Weighing Mode | (weighing mode , Electronic sensor weighing feedback) |
Packing Weight | 10-25Kg (change the clapper) |
Power | 380V 50Hz /3KW |
Cabin Volume | 50-75L |
(mm) Size | 1000*1500*3300 (according to the bag height) |
Frequently Asked Questions (FAQ):
Q: What is the maximum output per hour?
A: Depending on material characteristics and required accuracy, the
BH-SJS-FM25 can pack approximately 60-180 bags per hour (1-3
bags/minute).
Q: How is the high accuracy achieved?
A: Precision is ensured by the electronic weighing feedback system
combined with the three-stage servo motor control of the vertical
screw feeder, allowing for fast coarse feed and slow fine
feed/cut-off.
Q: Is it suitable for very fine or aerated powders?
A: Yes, the vertical screw feeding system and controlled feed
stages are specifically designed to handle challenging powders,
including fine and aerated types, with minimized dust and
consistent flow. Accuracy might vary slightly based on extreme flow
characteristics.
Q: How easy is it to clean between different powder products?
A: The stainless steel construction and design of the screw and
hopper facilitate easy cleaning. The vertical screw design is
inherently easier to clean than auger systems.
Q: What sealing options are compatible?
A: The machine outputs filled bags ready for various sealing
methods, including sewing (industrial, overlock, folding) or heat
sealing (pneumatic, 3-in-1, ink wheel).
