Ceramic Plate, Aluminum Substrate Wafer Cutting Machine Precision
Scribing Machine
1,Equipment use environment requirements and technical parameters
YSL3600Precision scribing machine single axis efficient cutting
mode; the maximum processing workpiece size is 150* 150mm, suitable
for small packaging substrate materials, soft materials cutting,
manual loading and unloading, automatic transmission and
positioning, automatic alignment cutting.
1.The scribing machine shall be installed without obvious
vibration.Clean the room without corrosive gas and strong magnetic
field. Working temperature is between 20 and 25 ℃ and remains
constant; relative humidity is <60%, no condensation.
2.The compressed air used by the scribing machine should be clean
without oil and water, and the compressed air must be filtered
through the cold dryer.
3.The cutting cooling water quality of the cutting machine shall be
clean without impurities, and the water temperature shall be within
16-20℃,and the water temperature fluctuation is less than or equal
to ± 1℃; the excessive water temperature may cause cutting edge
breaking, membrane wear, blade and cutting; the water temperature
of the cutting machine shall be within 9-16℃,and the water
temperature fluctuation is less than or equal to ± 2℃; the
excessive watertemperature may cause tin melting,reverse cutting
and brok
en cutting.(The difference from room temperature is within ± 3℃ to
avoid excessive condensate)
4.The water quality of the spindle cooling water used in the
scribing machine should be clean and free of impurities, the water
temperature should be within 12-20℃,and the water temperature
fluctuation is less than or equal to ± 1℃. If the water temperature
exceeds the standard, it may affect the spindle cooling, affect the
accuracy and stability of the spindle, resulting in cutting
deviation, poor cutting quality and other conditions.(With room
temperature and cutting temperature within±3℃)
5. Gas source oil content is less than 0.5mg / m3.
Basic parameters |
Outline Dimension | 580mm X 910mm X 1650mm |
Weight | About 600kg |
Maximum thickness of machable workpiece | 4mm(Please communicate with the equipment manufacturer in advance) |
Type of processable products | FN,DFN,BGA,LGA,FC,MEMS,LED Light bead BT plate and other materials with the same
physical characteristics |
Source | single phase AC220V±10%,Maximum power 4.5KVA |
Compressed air | Supply compressed air pressure:greater than 0.6MPa,the pressure
fluctuation is less than 0.02MPa |
Equipment working pressure:0.55-0.6MPa |
Consumption peak :200 L/min |
Filtering accuracy:0.01 μm/99.5%clean oil-free compressed air |
Cooling water | Pressure:0.2-0.3MPa |
Consumption peak :2.0 L/min |
Temperature :17℃_ ±2℃ (According to the required power adjustment
of the processing material,the larger the power,the lower the
temperature) |
Cut water | Pressure:0.2-0.3MPa |
Consumption peak:6.0 L/min |
Temperature:10℃-16℃(When the water temperature has special
requirements,please contact the equipment manufacturer in advance) |
Air exhaust | Total air discharge of equipment:1.5 m³/min |
Air speed of equipment air outlet:>17 m/s |
0perating temperature of equipment | 23℃+2℃ |
Relative humidity of environment | 40%-60%,No condensation |
Equipment placement place | Keep away from the vibration source,keep away from the strong
wind,dust,water mist,oil mist device. |
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
Keywords
SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing
Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder
Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste
Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT
Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer,
Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT
Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven,
SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP
Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA
Coating Machine, PCBA Insertion Machine, PCBA Router Machine.
YUSH Electronic Technology Co.,Ltd was founded in 2004,is located
in the world manufacturing city Jiangsu,Guprofessional pcb
separator/pcb depanelizer electronic equipment machinery. The
company has advanced production and processing equipment and an
experienced development and manufacture team,half of them have over
10 years experience in electronic equipment industry.
Begin with 2004 the company leader invested to develop and
manufacture the PCB separator and PCB depaneling machine.From then
on we pay more attention to product quality,safe to use and product
innovation,so far we have produced many high quality, stable
performance, high cost-effective products. Improve production
yields, increase productivity, and thus enhance the market
competitiveness of our customers. Until now we have design
different separating PCB types of PCB separator and PCB depaneling
machine with manual,motor-driven,pneumatic-driven,mold
punching,milling cutter router.Due to the good quality and
reasonable price our customers are all over the world.Up to now
YuSH have became one of the biggest PCB separator product.
Welcome more people to discuss with us about SMT technologies and
solutions, please Contact Us for more information:
Tel: +86 13416743702 (WhatsApp/Skype/WeChat),
Email:evaliu@hk-yush.com
