When scraping putty manually, it may be slightly more troublesome
when encountering such special positions as wall corners. But if
you use the machine to spray putty directly, it is relatively very
easy. When you scrape the putty manually, some putty residue may
fall on the ground, and the ground is dirty after the construction
of the whole wall. But if you use a machine to spray, you basically
do not have to worry about the putty residue falling on the ground,
the wall after construction, the ground is still always clean and
tidy.
What is Airless Spray Painting?
When compared to spraying with compressed air, what is airless
spray painting? To put it simply, Airless spray painting just uses
material pressure without the air. An electric or pneumatical pump
or petrol engine places the material under pressure and forces a
defined amount of material at a maximum pressure of 250 bar through
a tip bore. This transforms the material into a spray.
How do Airless paint sprayers work? A pump is used to bring the paint material to a pressure of up to
250 bar and then through an airless spray gun.When the paint valve
(gun) is opened, the paint is forced through an opening in the
airless tip of the right size relevant to the requirements.
Atomization is created through the pressure difference between the
coating material and the atmosphere.The flow rate and spray jet
width are determined by the tip.
What materials are suitable for Airless paint sprayers? Various materials can be sprayed using airless paint sprayers. We
have put together a summary of them here:Water and solvent-based
paints, varnishes, lacquers, oils, separating agents Synthetic
resin-based paints, PVC paints, 2-K lacquers Primers, fillers
Fireproofing paints, corrosion protection paints Emulsion, latex
paints, adhesives, sealants Masonry paint, roof linings, floor
coatings, silicon resin paint Fillers and other high viscosity
materials.
What Airless Paint Sprayer applications are there? Airless paint sprayers are suitable for all kinds of applications.
Whether inside or out, paint and material can be applied to the
following objects, for example: Radiators；Doors and windows；Walls
and ceilings；Wood and steel constructions；Exteriors；Brickwork；Roof
linings.
