610 Silicone Oil Polyurethane Foaming Additive For Producing Special Slow Rebound Flatulence Foam Sponge

610 Silicone Oil

Polyurethane Foaming Additive

For Soft Foam

—

Features

—

610 is an alkyl modified silicone surfactant, which is suitable for producing special slow rebound flatulence foam sponge. It is widely used in improving the technological properties of foaming and the stability of foam. It is also applied in the continuous production line of large flatulence sponge.

1. Reduce the surface tension, which facilitates to get uniform microbubbles and stable cells to reduce gas diffusion.
2. Increase the viscosity of the material faster, which helps to slow down the cell's rapid thinning and foaming.
3. Increase the strength of the cell wall and meridian.
4. Reduce the mixing of impurities, to avoid the reduction of the cell local surface tension and cause collapse and voids.
5. The recommended usage amount is 1% ～3%, according to the density of polyurethane foam to adjust the amount.

Silicone Oil · Polyurethane Foaming Additive · Made In China

Product Parameters

—

■ FYI: Above only represents typical results, and is not considered as specification. Actual property should be based on specific COA (Certificate of analysis).

Silicone Oil · Polyurethane Foaming Additive · Made In China

Type Of Production

—

Silicone Oil · Polyurethane Foaming Additive · Made In China

Package, Handle & Storage

—

Store in new steal drums, 200KGS/drums.
Keep container tighly closed in a dry and wel-ventilated place. Containers which are opened must be carefuly resealed and kept upright to prevent leakage.Store in cool place.
The shelf life is 12 months. After that, the pre-test should be made before use.

When handling polyols, precautions should be taken to avoid exposure to the eye or prolong contact with the skin. If eye contact occurs, flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.

Slow Rebound Foam Sponge· Polyether Polyol · Made In China

FAQ

Jiangsu Lihong Technology Development Co., Ltd. is a national high-tech enterprise integrating R&D, production, sales and technical services. The company is located in the Salt Chemical New Materials Industrial Park in Huai'an City, Jiangsu Province, covering an area of 150 acres. The total investment of the factory exceeds RMB 500 million. Currently, there are 14 production lines that lead the industry with independent innovation, with an annual production capacity of more than 100,000 tons.

Lihong Technology's Production Base: Jiangsu Lihong Technology Development Co., Ltd.
Site：huai'an City, China

Company headquarters: Nanjing Huishang Building Operation Center
Site：Nanjing City, China

Lihong Technology's E-commerce Center: Hefei Daqi New Materials Technology Development Co., Ltd.
Site：Hefei City, China

Lihong Technology's Production Base（Click To Download ）

Lihong Technology · Special Polyurethane Material Developer · Made In China

We are committed to becomea new standard of polyurethane special materials industry!

—

We take the continuous innovation as the driving force, with the internationalization, the globalization vision creates the domestic leading, the international first-class product quality and the enterprise image.

The company mainly deals in five core products:

—

polyether polyols, defoaming agents (including food grade), lubricant base oils, surfactants (including food grade), and waterproof grouting materials.

Lihong Technology · Special Polyurethane Material Developer · Made In China

Lihong Technology's Production Base（Click To Download ）