ZOA series zirconia analyzer
The ZOA series intelligent zirconia analyzer is an online oxygen
analyzer produced by our company, which can accurately measure the
oxygen content in flue gas and provide powerful data for optimizing
production for enterprises. This series of products adopts a split
flange installation and a straight inserted stainless steel
protective tube, which can effectively monitor the oxygen content
in flue gas within the range of 0-700 degrees. With the development
of industrial production, the requirements for enterprises are
becoming increasingly high, and the requirements for our zirconia
analyzer are also increasing. The overall requirements are higher
accuracy, longer service life, higher stability, and stronger
anti-interference. It can be used in different industrial
environments, such as garbage power plants, where the combustion
medium contains corrosive gases and a large amount of water vapor.
A corrosion-resistant and waterproof zirconia probe is needed to
greatly increase the product's service life.
ZOA series zirconia analyzer specifications and models:
ZO-III-B Zirconia Analyzer
ZOA-1 Oxygen Analyzer
ZOA-P180 Oxygen Analyzer
ZOA-3A Wall Mounted Oxygen Analyzer
ZOA-3/P1000 Zirconia Analyzer
HW-010 Zirconia Probe
AOP-3008-XC Zirconia Analyzer
ZO-BC Zirconia Oxygen Analyzer
HOM-200M-GL Oxygen Analyzer
ZOA-P1000A Zirconia Probe
L-100-2466 Oxygen Analyzer
ZOA-2000 Zirconia Oxygen Meter Secondary Table
ZO-7000 Zirconia Oxygen Analyzer
YB-88SFJ Explosion proof Zirconia Analyzer
DVS-YGEN11 zirconia analyzer probe
SD-ZO-III-PB Oxygen Analyzer
BWOA-P1000 Zirconia Probe
BWOA-3/P1000 Zirconia Analyzer
ZOA-3A-P1000 ZOA-3A BWOA-3/P1000
Product selection:
Firstly, it is necessary to clarify the temperature range of the
flue gas at the measurement location. Secondly, it is important to
identify the burning substance, such as whether it is a coal-fired
boiler or a gas-fired boiler, waste incineration, etc. The pressure
of the flue gas at the measurement location, whether it is positive
pressure or negative pressure, and the magnitude of the pressure
should be determined. Generally, a location with lower flue gas
temperature should be chosen. Of course, we also have
high-temperature zirconia probes, and the size of the installation
flange. If there is already a flange on site, our product's
zirconia probe needs to be installed with a matching flange of the
same specification. The choice of insertion depth and length is
usually to insert it into the 2/3 position of the flue gas duct.
Secondly, the shape of the secondary instrument is available in
wall mounted, vertical, and disc mounted versions. We use LCD
liquid crystal display, which has strong anti-interference ability
and remote signal output of 4-20mA 220VAC.
(1) Temperature of flue gas
(2) Combustion medium
(3) Insertion depth length
(4) Flange size
(5) Secondary instrument appearance
ZO-III-B ZOA-1 ZOA-P180 ZOA-3A ZOA-3/P1000 HW-010 AOP-3008-XC ZO-BC HOM-200M-GL
ZOA-P1000A L-100-2466 ZOA-2000 ZO-7000 YB-88SFJ DVS-YGEN11
SD-ZO-III-PB BWOA-P1000 BWOA-3/P1000
TF-TK-EX TF-TK-YHG TF-TK-ZRO XL-TF-TK TF-TKEN TK-YB EX-NFZRO
TK-FX/ZOA TKFX-ZOA,ZO-2000 MKFB-400-A/H ZOA-300B,ZO-FIIB CY-ZC CY-ZDA
OXT3000 YB-88G OXT1000 TKZO-5 NFZRO2-5 ZR402G CE-2C CE-2D ZFK8R
FZZRO2-5 YB-88GJ-ZW OAM-800 OAM-802 6000 TES300E OCM6E BOA-807
BOA-807-R EXFZZRO2-88 NFZO-05 MK-400-A-FHC OAM-800 OAM-800-R
OAM-802 OAM-802-R
CYZDA-ISG-FB-1000 CYZC/G-ISG-FB-III-180-YLS CYZC-ISG-FB-JGDJ-II-F
ISG-FB-1200 ISG-FB-JGDJ-II-F CYZC-ISG-FB-180-SPQ/DZ-II SYAN-001
ISG-FB-JGDJ-II-F
CECK-ISG-C CECK-ISG-CH CECK-ISG-CX SPE-2000 CE-2C CE-2D CEX-S767
S-2000-A CE-2C,CE-2CW,CE-2CS,CE-2D,CE-2DH,CE-2DS,SPE-2000
YB-88GJ-DW-400 YB-88GJ-DW-600 YB-88GJ-DW-1000 YB-88G-DW-1200mm
YB-88G-GWP-1000 YB-88G-GWP-1200 YB-88GZ-4 YB-88G-D YB-88G-D-400
YB-88G-D-600 YB-88G-D-1000 YB-88G-D-1200mm
BRCNZOR-RH BRCNZOR-HM BRCNZOR-MS BRCNZOR-SS
YK-2000-A YK-2000-A YK-2000-A/DL YK-2000-A/YT YK-2000-A/GW
YK-2000-A/ZY BRCNZOR-RH BRCNZOR-HM BRCNZOR-MS BRCNZOR-SS
