Product Description:
RC drilling rig is a new, efficient,environmentally
friendly,multifunctional crawler drilling rig. It uses double-wall
drill pipes and collect ore powder through the inner tube to the
cyclone collector. The machine can be used for sampling and
analysis in geological exploration departments.
This drilling rig can use compressed air reverse circulation
down-the-hole drilling in various strata. The drilling rig's drill
mast lifting, mast compensation, drill loading and unloading,
rotation and feeding, outriggers, winch, walking and other actions
are all realized by the hydraulic system. It greatly reduces the
labor intensity and improves the construction efficiency and
project quality.
Features:
1. Air compressor is used for air supply and slag discharge.
Various DTH hammers and bits can be matched according to the size
of the working hole.
2. Low failure rate and large torque. The rotation speed can be
adjusted according to different working conditions to effectively
improve the impactor footage efficiency.
3. The hydraulic system is equipped with an independent hydraulic
oil radiator to ensure that the drilling rig can work continuously
under high temperature outdoor climate conditions.
4. The movable slide can be pressed against the ground working
surface through the sliding of the compensation cylinder when the
drilling rig is operating, which improves the rigidity of the
drilling rig and ensures the working stability of the drilling rig.
5. The reliable and efficient air pre-filtration system can
effectively filter out dust in the intake air, is easy to clean and
maintain, effectively reduces engine wear, prolongs service life,
and improves work efficiency, making it suitable for harsh working
conditions.
Technical Parameters:
| Technical parameters | FSL600 |
| Max drilling depth(M) | 600 |
| Power(KW) | 132 |
| Drilling diameter(mm) | 105-450 |
| Air pressure(Mpa) | 1.6-6 |
| Air consumption(m3/min) | 16-75 |
| Drill pipe length(m) | 3 |
| Drill pipe diameter(mm) | 102/114 |
| Air circulation double layer drill pipe diameter(mm) | 102/114 |
| Axial pressure(T) | 7 |
| Lifting force(T) | 29 |
| Fast lifting speed(m/min) | 29 |
| Fast feeding speed(m/min) | 28 |
| Max rotary torque(Nm) | 12000/6000 |
| Max rotary speed(r/min) | 75/150 |
| Small secondary winch lifting force(T) | 2.5 |
| Jacks stroke(m) | 1.7 |
| Drilling efficiency(m/h) | 10-35 |
| Moving speed(km/h) | 3.5 |
| Uphill angle(Slope) | 21° |
| Weight of the rig(T) | 12.5 |
| Dimension(M) | 7*2.1*2.8 |
| Working condition | Unconsolidated formation and stone head |
| Drilling method | Top drive hydraulic rotary and pushing, hammer or mud drilling |
| Matched DTH hammer | Medium and high air pressure series |
| Optional accessories | Mud pump,Centrifugal pump,Generator,foam pump |
Applications:
The RC reverse circulation drilling rig is a new, efficient,
environmentally friendly, and multifunctional tracked drilling rig.
It uses a dual-wall drill pipe, with the inner pipe discharging
cuttings that are then collected by a cyclone collector. It can be
used for sampling and analysis work in geological exploration
departments.
RC drilling rig is a new, efficient, environmentally friendly,
multifunctional crawler drilling rig. It uses double-wall drill
pipes and collect ore powder through the inner tube to the cyclone
collector. The machine can be used for sampling and analysis in
geological exploration departments.
This drilling rig can use compressed air reverse circulation
down-the-hole drilling in various strata. The drilling rig's drill
mast lifting, mast compensation, drill loading and unloading,
rotation and feeding, outriggers, winch, walking and other actions
are all realized by the hydraulic system. It greatly reduces the
labor intensity and improves the construction efficiency and
project quality.
Support and Services:
Our Product Technical Support and Services for the Reverse
Circulation Drilling rig include:
- Expert troubleshooting assistance
- On-site maintenance and repair services
- Product training and knowledge transfer
- Regular software updates and technical bulletins
- Warranty support and parts replacement
FAQ:
Q: What is the brand name of this Reverse Circulation Drilling rig?
A: The brand name of this rig is Shandong Zhengyuan.
Q: What is the model number of this Reverse Circulation Drilling
rig?
A: The model number of this rig is FSL600.
Q: Where is this Reverse Circulation Drilling rig manufactured?
A: This rig is manufactured in Shandong Province.
Q: What type of drilling method does this rig use?
A: This rig utilizes reverse circulation drilling method.
Q: What are some key features of the Shandong Zhengyuan FSL600
Reverse Circulation Drilling rig?
A: Some key features include high efficiency, durable construction,
and reliable performance.
