1. Overview
A well water drill rig is specialized equipment used to bore holes
into the ground to access groundwater for residential,
agricultural, industrial, or geothermal purposes. These rigs vary
in design and capability to suit different terrains and project
requirements.
2. Advantages
| Fit Type | Commonly used brands | Internationally renowned brands | Technical Parameter |
| Drill pipe | Baosteel, Tianjin Steel Pipe | Tenaris,Vallourec | Tenaris' TMK drill pipe has a tensile strength of 155ksi |
| Bit | Jiangzuan, Chuanshi | Schlumberger | Schlumberger PDC drill bit has a lifespan of up to 2000 hours |
| Bushing | Angang Steel Pipe, Huayou Steel Pipe | TMK,Nippon Steel | Nippon Steel's SM series improves corrosion resistance by 40% |
4. Types of Drill Rigs
By Drilling Method:
Cable Tool (Percussion): Simple, cost-effective, ideal for shallow
wells.
Rotary Drilling: High-speed, suitable for hard rock formations.
Reverse Circulation (RC): Efficient for deep, large-diameter wells.
Auger Drilling: Best for soft soils; uses helical screws to lift
cuttings.
Fit Type | Commonly used brands | Internationally renowned brands | Core advantages |
mud pump | Lanshi Heavy Industry, Gemstone Machinery | National Oilwell Varco | NOV's 12-P-160 three cylinder pump has a displacement of 1600L/min |
vibrating screen | Huayou Energy and Jerry Equipment | Derrick,Schlumberger | Derrick's Hyperpool series increases processing capacity by three
times |
centrifuge | Zoomlion Heavy Industry and Sany Heavy Industry | Alfa Laval,Andritz | Alfa Laval's BTPX407 has a processing accuracy of 5 μ m |
SL400S WTAER DRILL RIG DETAILS
Technical parameters | SL330S | SL400S | SL500S | SL650S |
Max drilling depth(M) | 330 | 400 | 500 | 650 |
Drilling diameter(mm) | 105-305 | 105-325 | 105-400 | 105-450 |
Air pressure(Mpa) | 1.2-3.5 | 1.2-3.5 | 1.2-3.5 | 1.6-6 |
Air consumption(mm³/min) | 16-55 | 16-55 | 16-55 | 16-75 |
Drill pipe length(m) | 7 | 7 | 7 | 6 |
Drill pipe diameter(mm) | 89 | 89/102 | 102 | 89/102 |
Axial pressure(T) | 3 | 4 | 6 | 6 |
Lifting force(T) | 18 | 22 | 30 | 38 |
Fast lifting speed(m/min) | 30 | 29 | 29 | 28 |
Fast feeding speed(m/min) | 60 | 56 | 48 | 60 |
Max rotary torque(Nm) | 8000/4000 | 8000/4000 | 11000/5500 | 13000/6500 |
15000/7500 |
Max rotary speed(r/min) | 60/120 | 75/150 | 75/150 | 95/190 |
Big secondary winch lifting force(T) | - | - | - | Can be added 5 tons |
Small secondary winch lifting force(T) | 1.5 | 1.5 | 1.5 | 2.5 |
Jacks stroke(m) | 1.6 | 1.6 | 1.6 | 1.6 |
Drilling efficiency(m/h) | 10-35 | 10-35 | 10-35 | 10-35 |
Moving speed(km/h) | 2.5 | 2.5 | 3 | 3 |
Uphill angle(Slope) | 21° | 21° | 21° | 21° |
Weight of the rig(T) | 8.3 | 9.8 | 10.6 | 13 |
Dimension(M) | 6.32*1.7*2.39 | 6.26*1.85*2.43 | 6.52*1.85*2.51 | 6.73*2.1*2.75 |
Belt and chain adjustment: Regularly check the tightness of the drive belt and chain, adjust
them in a timely manner to avoid slipping or excessive wear. Record
adjustment parameters for future maintenance reference
Component cleaning frequency: Regularly clean the radiator and cooling system to prevent dust
from clogging. Clean the air filter and keep the intake air
unobstructed. Clean the surface of drilling tools, frames, and
other components to reduce corrosion.
Filter replacement cycle
Regularly replace hydraulic oil and fuel filters according to the
working environment and frequency of use. It is generally
recommended to replace the oil every 200 hours of operation to
maintain cleanliness and extend the lifespan of the equipment.
Lubrication requirements
According to the equipment manual requirements, regularly add
designated lubricating oil to each lubrication point. Focus on
lubricating high load parts such as transmission shafts and
bearings to ensure sufficient lubrication and reduce friction
losses. Record lubrication time and amount for tracking lubrication
effectiveness
Daily insapection points
Check the appearance of the drilling rig for damage or abnormal
wear, ensuring that all fasteners are not loose. Check if the
electrical system connections are good and if the cables are not
damaged. Verify the oil level observation of the hydraulic system
for any signs of leakage. Monitor the engine running sound to
ensure there is no abnormal noise. Check the wear and tear of drill
rods, drills, and other tools, and replace damaged parts in a
timely manner.
Quarterly excessive items: Conduct an unboxing inspection of the gearbox and gearbox, and
replace worn parts. Check and replace aging seals to prevent
leakage. Verify instruments and sensors to ensure accurate data.
Annual comprehensive maintenance: Conduct a comprehensive
disassembly inspection, cleaning, inspecting, repairing, or
replacing all components. Perform non-destructive testing on key
components to prevent hidden faults. Update maintenance records and
specify the maintenance plan for the next year.
Monthly maintenance tasks
Thoroughly inspect the electrical system and test whether all
functions are normal. Check and adjust the hydraulic system
pressure to ensure stable operation. Clean the sediment at the
bottom of the fuel tank and keep the oil clean.
Component replacement plan
Based on the service life and maintenance records of the
components, specify an annual replacement plan. Prioritize the
replacement of vulnerable parts and critical components to ensure
equipment reliability. Reserve commonly used spare parts to shorten
maintenance cycles.
WHO ARE WE?
FAQ:
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces
water well drilling rigs, core drilling rigs, down-the-hole
drilling rigs, pile drivers, etc. The products have been exported
to hundreds of countries around the world and enjoy a high
reputation all over the world.
2. How can we guarantee quality?
Always a pre-production sample before mass production;always final
inspection is done before shipment;and our main unit has a one-year
warranty, during which all damaged accessories can be replaced with
new ones. We provide machine installation and operation videos.
3. How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect
goods.
3) Support video inspection.
4. Do you have after-sales service?
Yes, we have a dedicated service team that will provide you with
professional technical guidance. If you need, we can send our
engineers to your workplace and provide training for your
employees.
5. How about quality assurance?
We provide a one-year quality guarantee for the main machine of the
machine.
6. How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within
15-20 days.
3) In the case of customization, we can deliver the machine within
20-25 days.
7.Can you do OEM for me?
We accept all OEM orders,just contact us and give me your design.we
will offer you a reasonable price and make samples for you ASAP.
