It is generally used for vehicle entrances and exits or gates, and
the lifting and lowering are controlled by remote control or
buttons.
The remote-controlled automatic lifting column is composed of a
bottom base, a lifting blocking barrier column, a power
transmission device, control and other parts. According to the
different needs of different customers, it has multiple
configuration methods for users to choose from and can meet various
functional requirements of customers. The equipment used for
diverting people and vehicles can be used in conjunction with
barrier control systems or separately. Automatic lifting can be
divided into hydraulic lifting and electric lifting. It has high
practicality, reliability, and safety.
The installation steps and main operations of the automatic remote
control lifting column mainly include the following five steps.
Let's take a look below:
1, Excavation of foundation pit:
There are two ways: 1. Dig a cylindrical hole with a depth of 1050
millimeters, and 2. You can also dig a long strip pit with a width
of 600mm and a depth of 1050mm;
2, Make permeable layer:
After excavating the pit, place 200mm thick gravel at the bottom of
the pit as a permeable layer and repeatedly compact it;
3, Equipment positioning:
Place the equipment in position and place it on the seepage layer
of the pit foundation, so that the center of the column is on a
horizontal line, making sure to be level on all four sides.
Leveling can be done using a spirit level or infrared spirit level.
The surface of the outer cylinder is generally level with the
ground or 1mm high, and then backfilled with 150-200mm deep gravel.
During backfilling, one person supports the column while the other
person backfills to prevent the column from being tilted during
backfilling, achieving the effect of fixing the column. Continue
backfilling until 15-20 centimeters above the ground and stop
backfilling;
4, Concrete pouring:
Evenly pour C30 concrete around the equipment and protect it to
prevent concrete from entering the equipment. Shake the concrete
with a vibrating rod to reduce gaps, and make sure to fill the
bottom of the flange tightly. If there is a change in the position
of the equipment during pouring, it should be stopped in a timely
manner. After the adjustment is completed, construction should
continue, forming a secondary pouring work. After the second
pouring is completed for 24 hours, it can be debugged but cannot be
opened to traffic;
5, Road maintenance:
The maintenance period is about 7 days. If motor vehicles need to
pass through normally during the maintenance period, steel plates
should be laid above the equipment. After the transaction, the
manufacturer shall provide the necessary auxiliary materials (i.e.
purchase list) for installation. If unclear, the manufacturer's
technicians shall provide one-on-one telephone and video guidance
throughout the process, responsible for the entire process. Only
after the installation is completed can the troops be withdrawn.
