Motorized One Inch Lighter Gas Valve for Automated Burner Management Systems with Solenoid Actuation and
Fail-Safe Close Function
Product Description:
Integrate seamless automation into your ignition sequences with
this Motorized One Inch Lighter Gas Valve. Designed for modern Burner Management Systems (BMS) and Programmable Logic Controller (PLC) based controls, this valve replaces manual levers with a robust solenoid actuator for remote or automated operation. Upon receiving an electrical
signal, the actuator swiftly opens or closes the integral ball valve, providing precise control over the lighter gas supply to the pilot or igniter. Crucially, it features a fail-safe close design – the valve automatically shuts off the gas flow if
electrical power is lost or the control signal is interrupted,
enhancing system safety. This essential automated gas valve is rated for frequent cycling and built to withstand industrial
electrical environments. Its one inch NPT connections ensure easy integration into existing automated ignition control panels and gas trains, enabling reliable, hands-off operation for boilers,
furnaces, and thermal oxidizers.
Bullet points:
Solenoid actuator enables remote or automated control via BMS/PLC signals.
Fail-safe close function ensures automatic shutoff on power/signal loss.
Integral ball valve provides reliable positive shut-off for the lighter gas supply.
Rated for frequent cycling in automated systems.
One inch NPT connections for easy integration into automated gas trains.
Specific application scenario:
Automatically opening the pilot gas valve based on a purge cycle
completion signal in a large industrial boiler's BMS, and
automatically closing it on flame failure or shutdown command.
Specifications:
| Component | Part Description |
| Mounting cup | Both sides with clear lacquered tinplate ,with down dimples |
| Outer gasket | Buna |
| Inner gasket | Buna |
| Stem | Red Color Plastic Butane gas stem ； Double Orifice-Double Orifice
2×ф0.51mm Red |
| Spring | Stainless steel |
| Housing | No tail orifice,four slots,black |
Exhibition:
We often go to India, Mexico, Algeria for aerosol valve
exhibitions. Our lighter gas refill valve with plastic stem or
metal stem have been exported to Mexico, Ecuador, Viet Nam, India,
Colombia, Russia, Ukraine, Indonesia, Peru, Philippines and other
countries
Packing and Delivery
Carton size: 515*340*230mm
Lighter gas refill valve: 2500 pieces / carton
Adaptor: 5000 pieces / carton
We can export the lighter gas refill valves to you by LCL container
and full 20ft, 40ft, 40HC container. We can export the valves to
you by LCL and FCL. We can use carton packing and pallet packing.
FAQ:
Q: What voltage options are available for the solenoid actuator?
A: Common options include 24VDC, 120VAC, and 240VAC. Specify your
required voltage and frequency (for AC) when ordering.
Q: What does "fail-safe close" mean for this lighter gas valve?
A: It means the valve spring-returns to the CLOSED position
automatically if electrical power is lost or the control signal is
removed, shutting off gas flow for safety.
Q: Can this automated gas valve be manually overridden in an
emergency?
A: Many models include a manual override lever or knob on the
actuator or valve stem. Confirm the specific override feature when
selecting.
Q: What is the response time for the solenoid to open or close the
ball valve?
A: Typically 1-3 seconds for full travel, depending on the specific
model and actuator size. Refer to the product datasheet.
Q: Is the solenoid assembly explosion-proof for hazardous
locations?
A: Standard units are not. For hazardous areas (Class I, Div 1 or
2), specify valves with certified explosion-proof (Ex d) or
intrinsically safe (Ex i) solenoids.
