Highlight: Electric wafer gate valve
Product introduction:
Electric gate valves are devices used in pipelines for liquids,
gases, and air systems, among others. An
electric gate valve uses an electric actuator to control the gate
valve, thereby enabling the opening and
closing of the gate valve and regulating the on-off of fluids in
the pipeline. It can be divided into two parts:
the upper part is the electric actuator, and the lower part is the
valve. The operating torque of the electric
actuator is greater than that of the valve. The opening and closing
speed of the electric gate valve can be
adjusted, and it has the characteristics of a simple structure,
easy maintenance, sensitive response, safety,
reliability, and ease of maintenance.
Product technical parameters:
Nominal Diameter DN (mm) | 15~200 |
Nominal Pressure PN (MPa) | 1.6 |
Test Pressure (MPa) | Strength (water) | 2.4 |
| Enclose (Water) | 1.76 |
Main Components | Body | WCB/CF8/CF8M |
| Valve ball | Stainless steel/Carbon steel |
| Seat | PTFE |
| Packing | Soft graphite |
| Shaft | 2Cr13 |
| Handle | Ductile iron |
Working temperature | ≤150℃ |
Medium suitable | Water, oil, steam |
Product features:
1. The valve body and bonnet adopt a gasket sealing structure,
which is safe and reliable in use.
2. The valve has excellent sealing performance, is convenient to
maintain, saves costs, and the valve disc
has good interchangeability.
3. The sealing surface of the valve has high hardness, featuring
good wear resistance, scratch resistance
and a long service life.
4. The valve stem is made of nitrided steel and undergoes surface
nitriding treatment, which gives it high
hardness, scratch resistance, corrosion resistance and a long
service life.
Our Advantages:
