Product Description
The one-step PERT insulation pipe production line is unable to
fulfill production requirements using conventional extrusion
equipment. Consequently, the screw and barrel of the extruder, the
pipe mold, and the sizing and cooling systems must be specifically
engineered. Within just two years, Huashida Company successfully
overcame 130 technical challenges and established China's first
one-step PERT insulation pipe production line with independent
intellectual property rights.
Huashida Company has subsequently developed both standard PERT
insulation pipes and fiber-reinforced PERT insulation pipes, which
are further categorized into two types based on their appearance
and performance: flat-wall insulation pipes and corrugated
insulation pipes.
Product Parameters
Compare between PE-RTII insulation pipe and Ordinary insulation
pipe| Picture | Weight/m | Cost of project | Pipe Length |
|
Light |
Low |
unlimited |
 |
Weight |
High |
Fixed-lenghth |
- PERT Work pipe; 2- Protective pipe; 3-Insulated pipe; 4-Stander;
- d1- Protective pipe outer diameter; e1- Protective pipe wall thickness; e2- Insulation Layer thickness; dn-Work pipe Nominal diameter ;en- Nominal thickness of the work tube
Feature
PE-RTII insulation pipe√ PERT II Pipes Can Tolerate Temperatures of 110°C
√ Pipeline smooth, no impurities, no pollution
√ Heating companies can realize unattended, automated operation
√ Low temperature heating
√ 60 °C supply water 45 °C backwater to meet the heating demand.
√ The construction is simple and convenient, and the excavation
amount is 40%
√ Greatly reduce construction costs
It saves the raw materials for using PE-RT II pipe.
Example: Level 2 design pressure: 10 Bar; for cold and hot water
transfer in buildings
Selection of different material pipes: the highest PE-RTIIS value;
the thinnest wall thickness
Compared to PERT I, PERT II can reduce material use by 15%
Relative to PP-R, PERT II can reduce material use by 30%
Note: According to relevant Chinese national standards and draft
| s | Dia.(mm) | Wall Thickness(mm) | Wall Thickness Area(m2) | Density(kg/m3) | Length(m) | Weight
(kg) | Weight Save
PERT/X |
| PERT II | S3.2 | 16 | 2.2 | 9.5E-05 | 947 | 1000 | 90 |
|
| PERT I | S2.5 | 16 | 2.7 | 1.1E-04 | 933 | 1000 | 105 | -17% |
| PP-R | S2 | 16 | 3.3 | 1.3E-04 | 900 | 1000 | 118 | -31% |
|
| PERT II | S3.2 | 20 | 2.8 | 1.5E-04 | 947 | 1000 | 143 |
|
| PERT eI | S2.5 | 20 | 3.4 | 1.8E-04 | 933 | 1000 | 165 | -15% |
| PP-R | S2 | 20 | 4.1 | 2.0E-04 | 900 | 1000 | 184 | -29% |
|
| PERT II | S3.2 | 25 | 3.5 | 2.4E-04 | 947 | 1000 | 224 |
|
| PERT I | S2.5 | 25 | 4.2 | 2.7E-04 | 933 | 1000 | 256 | -14% |
| PP-R | S2 | 25 | 5.1 | 3.2E-04 | 900 | 1000 | 287 | -28% |
|
| PERT II | S3.2 | 32 | 4.4 | 3.8E-04 | 947 | 1000 | 361 |
|
| PERT I | S2.5 | 32 | 5.4 | 4.5E-04 | 933 | 1000 | 421 | -17% |
| PP-R | S2 | 32 | 6.5 | 5.2E-04 | 900 | 1000 | 469 | -30% |
Production Line Details
Process FlowUp carrier pipe--pulling up to line--pipe catching
connect--transport forward---put into seal &cover film
device--foaming--foam curing ---PE cover extruding--vacuum sorb --
spray cooling--checking splice--cutting splice--off-pipe--down off
pipeEquipment components-- Plastic pipe upload table
-- Plastic pipe pulling device
-- Transfer Straight V wheel
-- Crawler-type push machine
-- Far infrared heating device
-- Pipe centering correction system
-- Foaming machine system
-- Over molding system
-- Automatic feeding machine
-- Winding machine
-- Hopper dryer
-- Extruder
-- Spray cooling water tank
-- Cutting Machine
-- Stacking table
-- Control SystemMore details
Extruder: PERT special single screw extruder, extrusion part using forced
water cooling feeding section, machine barrel slotted, the power
consumption of the main drive motor is greatly reduced; Screws with
a large length-to-diameter ratio (25-38:1) have excellent
plasticizing effects.
Extruder head: professional PERT pipe mold, smooth inner and outer surface of the
pipe, uniform wall thickness, special treatment of the flow
channel, more wear-resistant, PERT pipe dedicated efficient head.
Vacuum calibration box: Uniquely designed sizing sleeve, all-stainless steel vacuum box,
using PERT pipe dedicated sizing sleeve, accurate sizing and good
effect; High-efficiency spray cooling ensures the quality of the
pipe materials.
Coating die head: With a vacuum coating mold of invention patent and a specially
designed coating die head, it ensures uniform thickness of the
coating layer.
Winding machine: A fiber-reinforced device with an invention patent, featuring
efficient fiber weaving to ensure the strength of the pipe.
Chipless cutting machine: Wide range cutting from 32 to 200mm; High-strength alloy steel
blades, rotary knife cutting, smooth and flat pipe cutting edge
with small error; The cutting follow-up ensures the precise cutting
position; Professional PLC control, accurate operation; The feed
position is specially designed to ensure that the cutting is
completed in one go.
Application Scenarios
Huashida's continuous PERT insulated pipe pipes are ideal for a wide range of applications, including
district heating, cooling systems, oil and gas pipelines, and
industrial piping. Their superior insulation, anti-corrosion
properties, and long service life make them the preferred choice
for modern, sustainable piping systems.
Customer cases
Exhibition
Certifications
