Steel Structure Prefabricated Warehouse Building Industrial
Flexible Layout
Features of Steel Workshop
1. Flexible layout
2.Good ductility, strong plasticity and deformability, high seismic
resistant and wind resistant
3.Quick build and long service time
4. Light weight,high quality but low cost
5.Environmental, Material can be 100% recycled or degraded
Products Details
Product Name : Prefabricated Steel Structure Workshop for Factory
Structure System: Light steel structure
| 1. Main workshop: 198.1*120m*13.2 (Length* Width* Eave Height),
Ridge Height: 18.6m |
| 2. Primary Steel Structure: Lattic steel column without anchor
bolts+ H section steel beam+Crane Beam |
| 3. Secondary Framing: C Purlin, Tie Bar, Roof and Wall Support,
Bracing are formed as secondary frameing. |
| 4. Roof Cladding: Single Steel Sheet+Glasswool Blanket with
Aluminium-foil+Wire Mesh |
| 5. Wall Cladding: Single Corrugated Steel Sheet+Glass Curtain |
| 6. Lighting System: Skylight Panel |
| 7. Roof Vent: 36pcs Ventilator+8pcs E-clerestory |
| 8. Window: Aluminium alloy Window+ Tinted Glass Curtain |
| 9. Door: Sliding Door |
ALL THE DESIGN CAN BE CUSTOMIZED AS REQUIRED.
The load bearing parts for steel structure workshop are mainly
steel structures, including steel columns, steel beams, steel
structural basements, bracing systems for wall and roof. Steel
workshops are divided into Light Steel Workshops and Heavy Steel
Workshops. The Main Structure are usually made of Q345 Steel while
the Purlins and Bracing System are made of Q235 Steel. They are the
most common steel materials used for steel structure in China.
Advantages of Steel Structural Workshop:
1).Large span for great strength with light deadweight;
2).Short finishing time and low cost;
3).Fire proof and rust proof;
4).Convenient to assemble or disassemble.
Main parts of the steel structures and technical parameters:
| Main Steel Frame System |
| Main structure | H section steel Q355, alkyd painting, two primary painting, two
finish painting. |
| Roof purlin | XZ160*60*20*2.5, galvanized |
| Wall purlin | XZ160*60*20*2.5, galvanized |
| Intensive bolt | Grade 10.9 |
| Turn buckle bolt | M20+2, steel Q235, processing |
| Anchor bolt | M24, steel Q235, processing |
| Ordinary bolt | Galvanized bolt M20 |
| Ordinary bolt | Galvanized bolt M12 |
| Brace nut | Galvanized bolt M12 |
| Bracing System |
| Cross brace | Φ20 round steel bar Q235, process and painted (alkyd painting) |
| Angle brace | L50*5 angle steel Q235, process and painted (alkyd painting) |
| Column bracing | Φ25 round steel bar Q235, process and painted (alkyd painting) |
| Tie bar | Φ127*3 steel pipe Q235, process and painted (alkyd painting) |
| Batter brace | Φ32*2.5, Φ12 round steel bar Q235, process and painted (alkyd
painting) |
| Wall & Roof System |
| Roof panel | Corrugated steel plate or sandwich panel (EPS/fiber glass/rock
wool/PU) |
| Wall panel | Corrugated steel plate or sandwich panel (EPS/fiber glass/rock
wool/PU) |
| Edge cover | 0.5mm color plate, angle Alu. |
| Fittings & accessories | Nails, glue etc. |
| Unpowered ventilator | Diameter Φ600, stainless steel |
| Sky lighting band | 1.2mm FRP, double layer |
| Sliding door | sandwich panel door |
| Roof drainage system |
| Gutter | 0.5mm color steel plate |
| Rainspout pipes | Φ110 PVC pipe |
Our steel structure fabricaiton factory:
We own three light/heavy H steel production lines, BOX production
lines, C/Z purlin production lines and various types of profiling
steel sheet machines with advanced equipment such as plasma cutting
machine.
Installation:
Method 1: We provide shop drawing before installation.
Method 2: If you still don't know how to install, We will teach you
the installation in our factory. when necessary , we will assemble
a sample steel structure building for you.
Our service:
1. Structural steel fabrication, painting , galvanizing ,
pre-assembly
2. Designing, fabrication and installation for Prefabricated steel
structure building.
3. Deepen or design the fabrication drawing or shop drawing based
on your architectural drawing and construction drawing
4. Engineering consulting service
Packing & Loading:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ. All the products are loaded at the loading site of our factory
using crane and forklift by our skilled workers,who will prevent
the goods to be damaged.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be
suggested; . if not, the metal steel sheets will be ok. The cost of
the latter will be much
lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting
height _____m |
