Samsung Pneumatic Feeder 32mm
Product Introduction – Samsung 32mm Pneumatic Feeder
The Samsung 32mm Pneumatic Feeder is a robust, air-driven component
tape feeder designed to supply large and heavy electronic
components to Samsung CP-series SMT placement machines. It utilizes
compressed air to control the tape indexing mechanism, ensuring
precise, high-speed feeding for 32mm-wide carrier tapes.
Key Features
Pneumatic operation: Uses compressed air to advance the tape
step-by-step
Designed for large SMD components such as:
Power ICs
Transformers
Connectors
Shielded inductors
Compatible with Samsung CP-series machines, including CP40, CP45,
CP60
Supports fast and stable feeding in high-volume production
environments
Rigid construction for durability and long-term stability
Technical Specifications
Tape Width: 32mm
Drive Method: Pneumatic (air cylinder mechanism)
Feeding Pitch: Adjustable (typically 8, 12, or 16mm steps)
Power Supply: Requires compressed air (0.4–0.6 MPa recommended)
Reel Size Compatibility: Standard 13” and 15” carrier reels
Applications
Widely used in industries such as:
Automotive electronics
Power modules
Industrial control PCBs
Ideal for placing large components that require wider tape and
stable feed force
Compatibility
Fully compatible with Samsung CP-series pneumatic feeder platforms:
CP40 / CP40L
CP45 / CP45FV / CP45NEO
CP60 series
Related Accessories – Samsung 32mm Pneumatic Feeder
1. Mechanical Components
32mm Tape Guide Rail
Ensures stable alignment of wide tape during feeding.
Helps prevent skewing or misalignment of large components.
Cover Tape Separator / Pusher Assembly
Peels back and holds the cover tape to expose components.
May be larger and reinforced for wide tapes.
Upper Cover Plate
Holds down the component tape for smooth advancement.
Feeder Lock Pin / Locking Knob
Mechanism that secures the feeder to the feeder bank rail.
Reel Holder Shaft / Bracket
Holds the 13” or 15” component tape reel securely in place.
2. Pneumatic Components
Large-Bore Air Cylinder
Drives the tape feed stroke for 32mm-wide tape.
Heavier-duty than 8mm or 12mm versions.
Air Push Rod / Slide Linkage
Connects cylinder motion to the tape-advancing gear.
Return Spring
Resets the mechanism after each feed stroke.
Air Hose Fittings / Tube Connectors
Push-to-connect or threaded fittings for air input.
Exhaust Muffler / Silencer (Optional)
Reduces pneumatic noise during air release.
3. Testing & Maintenance Tools
Feeder Calibration Jig
Used to test and adjust the feeding action off-line.
Manual Test Box
Allows technicians to simulate feeding with compressed air.
Storage Rack / Feeder Cart
Organizes and stores wide feeders safely.
Cleaning Brushes / Tools
Used to clean the tape path and internal mechanisms.
Notes
Many accessories are shared with 24mm and 44mm pneumatic feeders
but vary slightly by size.
All guide rails, air cylinders, and brackets must match the 32mm
feeder frame type to ensure proper performance.
Related Part Numbers – Samsung 32mm Pneumatic Feeder (No Table)
Mechanical Components
J66021004A – 32mm Tape Guide Rail, for aligning and supporting the
wide tape path.
J66011005A – Cover Tape Pusher Assembly, designed for lifting and
separating the cover tape on 32mm tapes.
J66031013A – Upper Cover Plate, reinforced to handle wider tape
pressure.
J70613008A – Feeder Locking Pin or Locking Knob, for mounting the
feeder to the machine.
J66031019A – Reel Shaft Bracket or Reel Holder, to support 13” or
15” component tape reels.
J66031023A – Clamp Spring or Tension Spring Plate, maintains
consistent tape pressure and alignment.
Pneumatic Components
J70541006A – Air Cylinder (Large-Bore Type), provides the force to
index heavy 32mm tape.
J70631011A – Air Push Rod or Slide Link, connects the cylinder to
the tape advance mechanism.
J90651008A – Return Spring (Heavy-duty), used to reset the feeder's
slider after each cycle.
J70631015A – Air Tube Connector, quick-fit or push-to-connect type
for pneumatic lines.
J70631012A – Cylinder Mount Bracket, holds the air cylinder in
position inside the feeder.
Test & Maintenance Tools
J13013001A – Feeder Calibration Jig, for testing and aligning the
feeder off-machine.
J13014002A – Manual Feeder Test Box, simulates air feed manually
for functional checks.
J13012003A – Feeder Storage Rack or Trolley, for safe feeder
organization.
J13014004A – Cover Tape Rewind Reel Assembly, optional device to
collect used cover tape.
FAQ Guide – Samsung 32mm Pneumatic Feeder
1. What is the Samsung 32mm Pneumatic Feeder used for?
The Samsung 32mm pneumatic feeder is used to feed large
surface-mount components—such as power ICs, relays, connectors, and
shielded inductors—mounted on 32mm-wide carrier tape into Samsung
CP-series SMT machines.
2. Which machines is it compatible with?
This feeder is compatible with the following Samsung pick-and-place
machines that use pneumatic feeders:
CP40 / CP40L
CP45 / CP45FV / CP45NEO
CP60 Series
3. How does the feeder work?
It uses a compressed air-driven cylinder to advance the component
tape one step at a time. The air cylinder moves a push rod that
drives the tape advancement gear, exposing the next component for
pick-up.
4. What air pressure is required?
The recommended working pressure is 0.4 to 0.6 MPa (4–6 bar).
Low pressure may cause incomplete feeding; high pressure can lead
to mechanical wear or tape breakage.
5. What types of tape and components can it handle?
Tape Width: 32mm
Component Types:
Power semiconductors
Large capacitors
Transformers
High-current connectors
Relay packages
Tape Type: Embossed plastic carrier tape with or without cover tape
rewind
6. What are common issues and troubleshooting suggestions?
Tape not feeding
Check for low air pressure or a damaged air cylinder.
Cover tape not peeling correctly
Inspect and replace the cover tape pusher or tension spring.
Feeder does not lock into machine
Check the lock pin or mounting latch for damage.
Feeder returns slowly or sticks
Clean the slide linkage and inspect the return spring.
Air leakage
Replace worn air tube connectors or seals.
7. Which parts frequently require replacement?
Air Cylinder (J70541006A)
Return Spring (J90651008A)
Cover Tape Pusher (J66011005A)
Tape Guide Rail (J66021004A)
Feeder Locking Pin (J70613008A)
Air Connector (J70631015A)
8. How to test the feeder?
Use a feeder test jig (J13013001A) or a manual feeder test box
(J13014002A) to verify air stroke and tape advancement outside the
SMT machine.
9. Does it support cover tape rewind?
Some configurations may support optional cover tape rewind using a
rewind reel (e.g. J13014004A), but this depends on the model
version.
10. What is the suggested maintenance schedule?
Daily: Blow off dust, check tape alignment
Weekly: Inspect for air leaks, clean moving parts
Monthly: Lubricate mechanical joints and check spring tension
Quarterly: Replace worn parts and test with jig for accuracy
Physical warehouse,
fast delivery
after-sales support
providing door-to-door transportation services
price advantages,
offering a full range of SMT dip equipment and accessories
We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx
