FUJI 2EGTHA002022AGTHA010202 H24 H24G H24S Working Head IPS Camera Light Board

FUJI2EGTHA002022AGTHA010202 H24 H24G H24S working head IPS camera light board
Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery

Product Introduction – FUJI 2EGTHA000202 / 2AGTHA010202 IPS Camera Light Board (H24 / H24G / H24S Working Head)

Part Numbers:

2EGTHA000202
2AGTHA010202 (alternate or associated part number)

Product Name:

IPS Camera Light Board / Illumination Unit

Category:

Optical Illumination Module for Vision Systems

Applicable Models:

FUJI NXT H24, H24G, and H24S Working Heads

Product Overview

The FUJI 2EGTHA000202 / 2AGTHA010202 is an IPS (Image Processing System) camera light board, used within the H24, H24G, and H24S high-speed placement heads. It provides uniform, controlled lighting to the integrated vision system (IPS camera) to ensure precise component recognition, alignment, and quality inspection.

Key Features

High-Intensity LED Illumination
Designed to eliminate shadows and enhance component visibility during imaging.

Optimized for IPS Cameras
Calibrated to work with the head’s integrated camera system for optimal contrast and resolution.

Compact and Head-Integrated
Mounted directly inside the working head near the vision unit to provide consistent lighting in a confined space.

Precision Optical Assistance
Supports high-speed and high-accuracy vision processing during SMT operations.

Typical Applications

Illuminates components under the IPS camera during:

Component recognition
Orientation detection
Presence/absence verification
Used in high-speed, on-the-fly inspection in NXT placement systems.

Specifications (Typical)

Maintenance & Replacement Notes

Clean surface gently with anti-static wipes to avoid contamination.
Do not touch the LED directly to prevent ESD damage.
If lighting becomes dim or uneven, replace the board to maintain image quality.
Compatible only with designated head types (H24 series) — confirm part number before ordering.

Related Accessories – IPS Camera Light Board

Related Part Numbers – IPS Camera Light Board

Notes:

The light board is not a standalone imaging device – it must be used with the corresponding IPS camera and control PCB.
Always verify head model (H24, H24G, H24S) before ordering, as light board design may vary slightly.
If replacing the board, also check cabling and firmware compatibility with the head’s PCB.

FAQ Guide – FUJI 2EGTHA000202 / 2AGTHA010202 IPS Camera Light Board

Applicable for: H24, H24G, H24S Working Heads

1. What is the function of this part?

Answer:
The IPS camera light board provides uniform LED illumination for the internal image processing (IPS) camera of the working head. It enables clear, high-contrast imaging of components for vision-based inspection and alignment during high-speed pick-and-place operations.

2. Why is this lighting important?

Answer:
The light board ensures:

Correct component recognition
Accurate rotation and alignment detection
Improved image contrast for the IPS vision system
Without proper lighting, vision errors or misalignment can occur.

3. What are the compatible head types?

Answer:
This light board is compatible with the following working heads:

H24
H24G
H24S
Used on FUJI NXT II / III placement machines.

4. Where is the light board located?

Answer:
The light board is mounted internally near the IPS camera lens, within the working head. It faces the nozzle area to illuminate components during vision capture.

5. What are common failure symptoms?

6. How do I maintain this light board?

Answer:

Gently clean the surface with anti-static cloths
Avoid direct contact with LEDs or circuitry
Check wiring and connectors during head service
Replace if light is noticeably weak, flickering, or failed

7. Can the board be replaced independently?

Answer:
Yes. It is a modular component and can be replaced individually, though care should be taken to:

Power off and discharge ESD
Use correct mounting screws
Reconnect the cable to the head control PCB
Verify alignment and test vision performance after replacement

8. What parts are related to this board?

9. Are the part numbers interchangeable?

Answer:
Yes. 2EGTHA000202 and 2AGTHA010202 refer to the same or compatible versions of the IPS light board for H24-series heads. Use the number that matches your BOM or machine spec.

10. Does it require firmware or software settings?

Answer:
No software changes are needed for the light board itself, but its brightness and timing may be configured through the IPS vision control settings in the FUJI system interface.

pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.