FUJI 2MGKHH014000 XB03123 H02 H02F-head vacuum solenoid valve SMT Parts

FUJI 2MGKHH014000 XB03123 H02 H02F-head vacuum solenoid valve
Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery

Product Introduction – FUJI 2MGKHH014000 / XB03123 Vacuum Solenoid Valve (H02 / H02F Head)

Part Numbers:

2MGKHH014000
XB03123 (alternate or linked part code)

Product Name:

Vacuum Solenoid Valve – for H02 / H02F Working Head

Category:

Pneumatic Control Component / Vacuum System

Applicable Models:

FUJI NXT H02 and H02F Working Heads

Product Overview

The FUJI 2MGKHH014000 (XB03123) is a precision vacuum solenoid valve used in the H02 and H02F working heads of FUJI NXT series surface-mount machines. This valve controls the on/off flow of vacuum to the suction nozzle during pick-and-place operations. It plays a crucial role in ensuring accurate component pickup, secure holding, and timely release.

Key Features

High-Speed Response
Enables rapid vacuum switching for high-speed component placement.

Stable Vacuum Control
Maintains precise control over suction timing and airflow pressure.

Compact and Durable Design
Designed for tight integration into the head module while withstanding continuous cycling.

Reliable Operation
Supports thousands of operations per minute under FUJI NXT machine duty cycles.

Applications

Controls vacuum flow to the nozzle unit in H02 and H02F heads.
Ensures precise pick-up and release timing during high-speed SMT placement.
Integrated into the internal pneumatic circuit of the working head.

Specifications (Typical)

Type: Normally closed solenoid valve
Operating Voltage: 24V DC (typical for FUJI control systems)
Response Time: < 20 ms
Ports: 2 or 3 depending on circuit configuration
Mounting: Directly mounted to H02/H02F head pneumatic base
Material: Metal body with high-durability seals
Control: Triggered via machine's vacuum system logic (via head PCB)

Installation Notes

Use with genuine FUJI heads to ensure mechanical fit and vacuum seal integrity.
Ensure vacuum hoses are properly connected and leak-free.
Valve orientation and gasket alignment are critical to prevent performance issues.

Typical Related Parts

Related Accessories – FUJI 2MGKHH014000 / XB03123 Vacuum Solenoid Valve

Related Part Numbers – FUJI 2MGKHH014000 / XB03123 Vacuum Solenoid Valve and Components

Notes:

Use genuine FUJI parts to maintain vacuum integrity and machine performance.
Seal replacement and tubing inspection are recommended during valve maintenance.
Electrical connections must be checked for wear or corrosion to avoid valve malfunction.

FAQ Guide – FUJI 2MGKHH014000 / XB03123 H02/H02F Vacuum Solenoid Valve

1. What does this solenoid valve do?

Answer:
The FUJI 2MGKHH014000 (also known as XB03123) is a vacuum solenoid valve that controls the on/off switching of vacuum suction to the nozzle in the H02 and H02F working heads. It enables the head to pick up and release components with precise timing during SMT operations.

2. Where is this valve installed?

Answer:
It is mounted inside the H02 or H02F working head, typically on the pneumatic block or near the nozzle unit, and connected via tubing to the vacuum source and nozzle path.

3. What working heads are compatible?

Answer:

H02 Working Head
H02F Working Head
Both used in FUJI NXT I / II / III platforms.

4. What happens if the valve fails?

Answer:
Failure may result in:

Inability to pick up components
Components dropping prematurely
Vacuum alarms or pickup error codes
Unstable vacuum level or pressure drop during operation

5. How can I tell if the valve is faulty?

Answer:

Perform a vacuum test and listen for audible leaks
Use diagnostic software to monitor vacuum response time
Swap with a known-good valve to verify the fault
Check for signs of internal blockage, coil failure, or response delay

6. Technical Overview

7. What parts are associated with this valve?

8. How to replace the valve?

Answer:

1. Power off machine and disconnect air supply.
2. Remove the working head and access the valve mount.
3. Disconnect vacuum tubing and electrical connector.
4. Unscrew and replace the valve.
5. Reinstall tubing and re-calibrate vacuum level if needed.

9. Maintenance Tips

Replace valve during scheduled head rebuild
Clean surrounding area to avoid debris entering valve ports
Inspect for vacuum hose aging or leaks
Check electrical coil resistance during diagnostics

10. Is this valve sold individually or in kits?

Answer:

Typically sold individually
May be included in H02/H02F head pneumatic kits or maintenance kits

pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.