Desand hydrate cyclone is mainly used in removing sand ,mud from
starch slurry, cassava slurry ,potato slurry after crushing.It is
widely used in corn starch processing ,cassava starch and cassava
flour processing wheat starch processing ,sago processing ,potato
starch processing .
Main technical parameters
Model | Material | Capacity(m3/h) | Feed Pressure(MPa) | Sand Removal Rate |
CSX15-Ⅰ | 304 or nylon | 30-40 | 0.2-0.3 | ≥98% |
CSX15-Ⅱ | 304 or nylon | 60-75 | 0.2-0.3 | ≥98% |
CSX15-Ⅲ | 304 or nylon | 105-125 | 0.2-0.3 | ≥98% |
CSX20-Ⅰ | 304 or nylon | 130-150 | 0.2-0.3 | ≥98% |
CSX20-Ⅱ | 304 or nylon | 170-190 | 0.3-0.4 | ≥98% |
CSX20-Ⅲ | 304 or nylon | 230-250 | 0.3-0.4 | ≥98% |
CSX22.5-Ⅰ | 304 or nylon | 300-330 | 0.3-0.4 | ≥98% |
CSX22.5-Ⅱ | 304 or nylon | 440-470 | 0.3-0.4 | ≥98% |
CSX22.5-Ⅲ | 304 or nylon | 590-630 | 0.3-0.4 | ≥98% |
The Working Principle of Desand Machine
Desand equipment is used to desand material based on the theory of
centrifugal separation .Because of the water inlet pipe installed
on the eccentric position of the cylinder , when water goes into
water inlet pipe through cyclone sand , firstly form downward
surrounding fluid along the surrounding tangential direction and
move down round . Water current turns upward rotation along
cylinder axis as reaches a certain part of the cone. Finally water
discharges from the water outlet pipe . The sundries fall into
bottom conical slag bucket along the cone wall under the force of
fluid inertial centrifugal force and gravity . The cone bottom has
components to prevent sundries from rising up. The sundries can
outflow under the water current effect as long as you open the
manual valve when the sundries in the slag bucket reaches a certain
extent.
Real application case
There are four steps to making starch
1.Cleaning:To remove the stone sand and from the raw material.
2.Crushing :To destroys the fiber structure and makes the starch
particles free.
3.Separator:To removing sand ,mud from starch slurry, degreasing,
microslag separation, protein separation, washing and concentration
of all kinds of starch and modified starch emulsion.
4.Drying and Packing:To dehydrator the wet starch, sifter and
packaged.
Our Services
Pre-sale service
1.Accept customer consultation and customize products according to
customer requirements.
2.Provide customers with product process, equipment parameters and
processes, and train personnel according to customer requirements.
Sale service
1.The company sent technical personnel to the scene of the on-the
-spot guidance equipment installation,debugging and training
operators.
2.If there is any problem during the installation, please contact
the responsible person in time. We will solve the problem in time
to ensure the installation progress.
After-sale service
1.Provide telephone and video support. If the customer has any
problems or abnormal devices in use, you can contact us by phone.
We will help the customer solve the problems by phone or video.
2.If the phone or video doesn't work, the company will send
technicians to the scene to fix the problem.
3.Products purchased in our company, we provide one-year warranty
and lifelong maintenance service.
FAQ
Q1: Is your company a factory or trading company?
A: Our company is a factory in Henan Province ,with export license
and we have done export business over 20 years professionally.
Q2.What is your main business?
A: Zhengzhou Jinghua is devoted to starch processing machine. The
machine of starch processing line , such as : cassava starch line ,
cassava flour line , potato starch line , sweet potato line , wheat
starch ,sago line and garri line
Q3. Can you customize the products according to our requirements?
A: Yes, we have a professional technical department that can
customize the products according to your requirements
Q4: Are your products can be assured ?
A: Our machines are all have CE certificate by SGS, TUV.
Q5: If we show you our layout of factory, can you help us to design
the whole process line?
A : Yes, our experienced engineers and technical employees can help
you to arrange the layout and installation of whole process line
based on your real situation;
Q6: If we have samples of new products, can you help us to analysis
and design the machine?
A: Yes, Our technical department can help you to analysis, design
and test the new products you offered.
