MT Burmah Castrol strips Type A,Magnetic particle testing
Magnetic particle flaw detector fittings Burmah Castrol strips Type A G NDT testing
Type:A and G
1 set includs 5pcs
Magnetic yoke HCDX-Y2
The HCDX-Y2 is an AC electromagnetic yoke, ergonomically designed to improve productivity. The yoke generates a strong AC magnetic field for the detection of surface indications during magnetic particle testing.
Lightweight with an ergonomic grip and trigger, the HCDX-Y2 is designed for the rugged demands of field inspection. Featuring replaceable spare parts body design, isolated trigger switch,power cord,mainboard,UV & white light lamp and legs all can be replaced by user, the HCDX-Y2 is easily serviceable not stop a job from getting done.
A super bright LED attachment is available as an optional item to help illuminate the inspection area while simultaneously magnetizing the part. All-in-one Kits are also available, including Red and Gray magnetic powders, a yellow paint marker, and cleaning cloth, for a full inspection kit in one convenient carrying case.
BENEFITS
Increase inspector productivity and reduce physical fatigue
• Less arm strain, wrist fatigue and physical stress help operators get more done due to the lightweight and ergonomic design.
• Easily position the yoke in any direction with lightweight, heavy-duty and powerful electronics components.
Keep tools in service with a design that’s built to last
• Cords and triggers can be easily replaced, so work doesn’t stop and tools aren’t scrapped due to accidental damage.
• Prevent dust and dangerous water damage with an IP54 o-ring sealed housing.
FEATURES
• Ergonomic, light-weight design
• IP54 sealed housing resists dust and water
• Field-swappable power cord
• Isolated, replaceable trigger switch
• Steel shields for leg protection
• Exceeds ASTM lifting specifications
• Convenient carrying case supplied with all yoke shipments
• Optional LED UV & White yoke light lasts longer and is more intense compared to traditional bulbs
• Two power supply modes are optional:
* 110V/220V/240V Single-phase AC power supply (straight plug mode);
* DC magnetization power supply (DC battery pack with digital display screen)
• Optional special waist pack can carry magnetized power battery, magnetic suspension, contrast agent etc.
APPLICATIONS
Defect location: Surface Ideal for:
• Field Testing
• Difficult to reach areas
• Spot, weld and in-service inspections Defect examples:
• Seams
• Tears
• Shrink cracks
• Quenching cracks
• Fatigue cracks
SPECIFICATION COMPLIANCE
JB/T7411-2012
ASTM E1444-05
ASTM E709
EN10228-1:1999
ISO 9934
ASTM E 3024
Parameters index
| Model Items | HCDX-Y2 | HCDX-Y7A |
| Electrical Requirements | AC110-115V 50/60Hz,AC220-230V 50/60 Hz,AC240V 50/60Hz |
| Waveform | AC |
| Tangential Field Strength | > 2kA/m at midpoint between legs / poles |
| Working temperature | -10~+40℃ |
| Duty Cycle | 50%, max on time is 90 seconds |
| Ingress Protection (IEC 60259) | IP54 |
| Relative humidity | <80% |
| Sensitivity | ASTM E1444-05,ASME 2007 page number V |
| DC power pack | X | * |
| AC working current | AC2.2A |
| DC working current | X | DC 1.5A |
| Battery charging time | X | 3Hours |
| Battery working time | X | 6h |
| Leg / Pole Span | 0~220mm |
| Leg size | 22*22mm |
| Power cord length | 3M |
| Lifting Force | A C | ≥7.1kg (69N) |
| D C | ≥22.2kg (216N) |
| Weight | Yoke | 2.3kg |
| DC Battery | X | 0.6kg |
Note: “X” not included, “*” included
