1, Applicable scope:
Mainly suitable for measuring the mechanical strength of PVC
insulated cables or rubber insulated and extra flexible wires with
a rated voltage of 450/750V or below, and with two or more cores.
Its performance and structure should meet the national standards of
GB/T 5013.2-2008, GB/T 5013.8-2008, and GB/T 5023.2-2008. The
instrument have the characteristics of novel appearance design,
reliable performance and structure, convenient operation, dual use
of one machine, and high accuracy of test data. Reserve RS232,
RS485, or Ethernet universal communication interfaces for the
output and retrieval of experimental data. IEC60227-2:2003
2, Main technical parameters:
1) Two rounds
l Power supply voltage: AC 380 V three-phase four wire.
l Motor power: 200 W.
l Car travel: ≥ 1 m.
l Car speed: 0.33 m/s (adjustable).
l Sample voltage: 180V/450V (adjustable).
l Sample length: 5000 mm.
l Sample current: 0-35 A (adjustable).
l Counting table: 15000 round trips can be preset.
l Pulley diameter: φ 60 φ 80 φ 120 φ 160 φ 200 (each with 2 flat
grooves).
l Mass of heavy hammer: two each, 0.5 kg, 1.0 kg, 2.0 kg, 3.0 kg,
and 4.0 kg.
2) Three wheeled
l Power supply voltage: AC 380 V three-phase four wire.
l Motor power: 200 W.
l Car travel: ≥ 1 m.
l Car speed: 0.1 m/s (adjustable).
l Sample voltage: 180V/450V (adjustable).
l Sample length: 5000 mm.
l Sample current: 0-35A (adjustable).
l Weight of heavy hammer: two each for 21N, 28N, and 42N.
l Pulley diameter: φ 40 φ 45 φ Two for each of 50.
3. Testing:
1) Test sample types: two core single-phase, two core three-phase,
three core three-phase, three core four phase. Equipped with a DC
12V signal current source.
2) Testing methods: No load, single-phase (two core), three-phase
(three-phase three wire/three-phase four wire), cables with more
than five cores, and cables with less than 18 cores can be selected
at any time.
3) Test sample failure inspection:
l Ammeter indication: A, B, and C phases are disconnected and
automatically shut down.
l Current indication: A/B, A/C, B/C short circuit and ringing alarm
to automatically shut down.
l Current indication: A, B, C and pulley short circuit alarm and
automatic shutdown.
l For samples with five or more cores, no load current is applied.
As long as the wire cores are connected in series to V-V, the panel
signal source displays a DC voltage of 12V. If there is a circuit
breaker, the system will automatically stop.
Our services:
1. Ensure the high quality of the product.
2. Packaging can be done according to customer requirements and
pictures can be attached before shipment.
3. Transport professional documents
4. Provide professional product consultation before sales, and we
guarantee to answer any professional technical questions you may
have within 48 hours; Provide timely product technical services
after sales, and provide solutions within three working days.
5. Our engineers provide professional after-sales service
6. The warranty period is 12 months. During the warranty period, we
are responsible for providing free maintenance, upkeep, and
replacement of damaged and defective parts (under normal use) for
the user's equipment. After the free warranty ends, service fees
will be charged at your discretion.
7. Provide the fastest response to maintenance and assistance
requests from users. After the user submits a maintenance request,
ensure to provide professional technical support in the shortest
possible time and in the fastest way possible.
