FUJI XM00221 NXT I Y-axis Motor SMT Machine Spare Parts

FUJI XM00221 NXT I Y-axis motor

Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery

FUJI XM00221 NXT I Y-axis Motor – Product Description

Overview

The FUJI XM00221 is a high-precision Y-axis drive motor designed for the FUJI NXT I series SMT pick-and-place machines. This motor is a key component responsible for driving the machine’s Y-axis (front-back) linear movement, enabling highly accurate positioning of the module’s work platform during component placement.

Key Features

Designed for Y-axis movement (front-back) on FUJI NXT I modules.
Provides high precision, fast response, and stable motion for SMT operations.
Works with FUJI’s servo control system and encoder for closed-loop control.
Highly durable, stable, and suitable for 24/7 continuous operation.
Modular design allows for easy replacement and maintenance within the NXT I platform.

Applicable Models

FUJI NXT I Series Modules (e.g., M3, M6)
Controls the Y-axis movement of the module’s platform.

Technical Specifications (Typical)

Main Functions

Drives the Y-axis linear movement of the NXT I module’s work platform.
Supports high-speed PCB positioning and front-back adjustments during placement.
Ensures precise, stable, and reliable SMT operations for high-volume manufacturing.

Related Accessories and Components

Maintenance Recommendations

Regularly check the linear rails and guides for proper lubrication.
Inspect motor signal and power cables for wear or looseness.
Ensure the cooling fan (XH01431) is functioning properly.
Check for unusual noise, overheating, or positioning errors as signs of motor wear or failure.

Summary

The FUJI XM00221 Y-axis Motor is a crucial motion control component for the NXT I module, providing precise and stable Y-axis (front-back) positioning of the machine platform. Proper maintenance and timely replacement ensure high-speed, high-accuracy SMT production performance.

FAQ Guide – FUJI XM00221 NXT I Y-axis Motor

General Information

Q1: What is the FUJI XM00221 motor used for?

A:
The FUJI XM00221 is a Y-axis linear drive motor used in FUJI NXT I modules. It controls the front-back movement of the placement head or platform, ensuring precise alignment of the PCB during component mounting.

Q2: Which FUJI machines is this motor compatible with?

A:
It is specifically designed for:

FUJI NXT I modules (e.g., M3, M6)
Not used in NXT II/III without mechanical adaptation.

Features & Functions

Q3: What axis does this motor control?

A:
It controls the Y-axis — the front-back linear movement of the placement module on the machine base.

Q4: Is the XM00221 motor a servo or stepper motor?

A:
It is an AC servo motor (or linear drive type, depending on version) controlled via a closed-loop system with encoder feedback for precise positioning.

Q5: What are its key advantages?

A:

High speed and precision.
Long operational life with low maintenance.
Seamless integration with FUJI NXT servo control systems.
Smooth linear motion, critical for accurate placement.

Installation & Calibration

Q6: How is the XM00221 installed in the machine?

A:

Mounted under the NXT module chassis.
Connected to the servo driver board (e.g., 2AGTHA000100).
Interfaces with signal cables (XS02050) and power cables (XS02051).
May connect to linear guide assemblies or ball screw tracks depending on configuration.

Q7: Is calibration needed after replacement?

A:
Yes. After replacing the motor:

Perform homing procedures via the machine control system.
Calibrate Y-axis travel limits to ensure accurate PCB alignment.

Common Issues & Troubleshooting

Q8: What are common signs of motor failure?

A:

Inconsistent Y-axis movement.
Positioning errors or misalignment of PCBs.
Servo alarms or feedback loss on the controller.
Motor overheating or abnormal noise during movement.
Vibration or jittering of the platform.

Q9: What might cause the XM00221 motor to fail?

A:

Excessive wear or bearing failure due to long-term use.
Electrical issues (short circuits, cable damage).
Overload from misaligned rails or mechanical blockage.
Failure of connected driver board or encoder.

Q10: How to test if the motor is faulty?

A:

Use multimeter to check for open/shorted windings.
Swap signal/power cables to isolate cable issues.
Test encoder feedback using diagnostic tools.
Observe for smooth manual rotation (if applicable).
Run servo diagnostics from the FUJI system interface.

Maintenance Advice

Q11: How often should this motor be maintained?

A:

Inspect every 6–12 months depending on usage.
Clean surrounding dust or debris from rails and fans.
Check for cable integrity and connection tightness.
Re-lubricate associated linear guides (XS05120).

Q12: When should the motor be replaced?

A:

After 3–5 years of continuous operation.
Immediately if positioning becomes unreliable or the motor fails self-diagnostics.
If overheating or vibration is persistent despite proper load and alignment.

Related Parts

Best Practices

Always perform full homing and alignment after motor replacement.
Replace signal and power cables together if motor was exposed to electrical damage.
Keep cooling components operational to extend motor life.
Document motor runtime via machine logs for predictive maintenance.

Summary

The FUJI XM00221 Y-axis motor is a critical motion component for NXT I modules, ensuring precise and smooth front-back movement. Proper maintenance and periodic inspection are key to long-term machine stability and SMT quality.

pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.