About Shanan.pdf
Application: food, pharmaceutical, chemical, rubber, ice, ice products, toys,
eyewear, shoes, leather, knitting, printing and other industries to
detect the metal impurities in the production process or raw
materials, such as: iron, non-magnetic metal Items (silver, steel,
aluminum, stainless steel and other non-ferrous metals can be
detected), improve product safety factor and reduce hazards.
Advantages:
Advanced technology: the introduction of imported multi-detection
technology, phase and comprehensive, product and automatic balance
correction technology, the detection sensitivity and stability have
been improved, the detection range is wider, especially for salt,
high moisture content is difficult to detect The product has 2-3
times better detection sensitivity than similar products.
The core circuit adopts a single-chip high-performance FPGA
hardware solution, using imported high-quality electronic
components; [mainly selected by the United States Micro-chip,
Analog Device, National Semiconductor, Wimma, Japan Hitachi, NEC,
Sanyo and other companies to produce integrated circuits,
capacitors, etc. Electronic components] After advanced processing
technology and standardized inspection process, the product has
high sensitivity and stable
Confectionery & Snack Foods
The Confectionery and Snack Food segment includes food products
such as chocolates, candy bars, sweets, jellies, gums, hard and
chew candies, through to snack foods such as potato chips, crisps,
ready to eat nuts, trail mix, savory snacks, energy and granola
bars.
Challenges with Confectionary and Snack Foods
Some challenges found within this sector include:
- Large amount of processing and production of the food product,
which increase the chance of stainless steel contamination caused
by processing and packaging machine failure
- Warm, sticky and dusty environments and the need for regular
cleaning of machines, conveyors and belts
- Increasing use of metalized film and foil in packaging of many
snack and confectionery products, making conventional metal
detection difficult to use
- Integrity of products during the production process (i.e. cracking
or missing coating on a chocolate bar) or missing items
- Product temperature varies throughout processing lines which can
affect product signals in metal detection equipment
- Some snacks are made up many ingredients, which give consistent
density challenges to x-ray systems
Model | SA-990 |
Machine length (mm) | 1330~2000 (can customize) |
Detection tunnel width (mm) | 200~1200 (can customize) |
Detection tunnel height (mm) | 50~1000 (can customize) |
Standard detection sensitivity | FE(Φmm) | ≥0.5 |
NON-FE(Φmm) | ≥0.8 |
SUS304(Φmm) | ≥1.0 |
Protection level | IP67 |
Number of memory products | 200+ kinds |
Display mode | Touch Screen |
Operation mode | Touch button input |
Alarm mode | Alarm stop, buzzer alarm or rejector device optional |
Machine material | Stainless steel 304, fit for HACCP, GMP, FDA, CAS and other
standards |
Conveyor belt material | Food grade PVC or PU belt |
Machine weight | About 280KG |
Motor | 90~370W |
Transfer speed | 10-28m/min (optional and adjustable) |
Power supply | AC220V±10%, 50-60HZ (Customize AC110V or AC380V) |
Belt height above the ground (mm) | 700+100 (can customized) |
Maximum load (single piece) | 10~50KG (can customized) |
Using environment | Temperature: -15℃~40℃, relative humidity: 30~85RP |
| SA series | 3008 | 3012 | 4008 | 4010 | 4012 | 4015 | 4020 | 4025 |
| 50 Through width(MM) | 300 | 300 | 400 | 400 | 400 | 400 | 400 | 400 |
| Passing height(MM) | 80 | 120 | 80 | 100 | 120 | 150 | 200 | 250 |
| Belt width(MM) | 270 | 270 | 370 | 370 | 370 | 370 | 370 | 370 |
| standard | FE(ΦMM) | 0.6 | 0.7 | 0.6 | 0.6 | 0.7 | 0.8 | 1 | 1.2 |
| Detection | NON-FE(ΦMM) | 0.8 | 1 | 0.8 | 1 | 1 | 1.2 | 1.5 | 1.8 |
| Sensitivity | SUS304(ΦMM) | 1 | 1.2 | 1 | 1.2 | 1.2 | 1.5 | 2 | 2.5 |
| conveyor length(MM) | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 | 1600 |
| Belt height from the ground(MM) | 750±50 can customize |
| protection level | IP67 |
| Number of memory products | 100 kinds |
| Operation method | Touch button input (touch optional) |
| Conveyor belt material | food grade PVC belt(PU belt) |
| Alarm mode | Alarm stop ,buzzer alarm or reject mechanism optional |
| Belt speed | 28m/min |
| Machine material | Carbon steel paint or stainless steel 304, fit for HACCP, GMP. CAS |
| Machine weight | About 280KG |
| Motor | Taiwan high-power motor can transport weight 1-15KG |
| Power supply | AC220V±10% 50-60HZ (can be customized AC110V or 380V) other
optional |
| Using environment | Temperature:-18~50°C , relative temperature:30-90°C |
https://www.youtube.com/channel/UCMCcyqdq_8qF7uqp0L82RQA
