Single girder bridge crane with easy operation and 12.5ton
Warehouses use
1. Applicable span range is moderate:
The deflection of single-beam structure will be larger than that of
double-beam structure under larger span.
It is usually applicable to the span range of about 7.5 meters to
22.5 meters (specific requirements need to be determined according
to design specifications and actual working conditions). When it
exceeds this range or the main beam stiffness requirements are
extremely high, double beams or special reinforcement designs need
to be considered.
2. The working level is usually A3-A5 (intermediate):
The design work system (busyness and idleness, load spectrum)
belongs to medium use intensity.
Advantages: It can meet the material handling, equipment
installation and maintenance needs of most conventional workshops
(such as machining, assembly, warehouse, maintenance workshop,
etc.).
3. The clearance requirements for the plant are relatively low:
Because the structural height (main beam height + hoist height) is
smaller than that of double-beam cranes.
Advantages: It is more advantageous when the plant height is
limited and can effectively utilize space.
4. Complete safety devices (standard or optional):
Lifting height limiter (required): prevent over-winch.
Travel limiter (trolley, trolley): prevent overtravel collision.
Emergency stop switch (flashlight/cab).
Lifting weight limiter (overload limiter, strongly recommended):
prevent overload and protect equipment and personnel safety.
Buffer (car stop): energy absorption at the end of the track.
Advantages: ensure operational safety and equipment safety.
5. Wide range of application scenarios:
Very suitable for workshops, warehouses, machine repair shops,
assembly lines, small and medium-sized manufacturing enterprises
and other occasions.
Used for lifting parts, raw materials, semi-finished products,
finished products, molds, equipment, etc.
Not suitable for: metallurgical casting (high-temperature molten
metal), explosive hazardous environment (unless special
explosion-proof type), chemical strong corrosive environment
(unless special anti-corrosion type), ultra-high frequency heavy
load (such as steelmaking workshop feeding) and other extreme
working conditions.
