This product is a spherical alumina powder with high globularity
with high thermal conductivity, developed by high temperature
melting technologies and indicates excellent characteristics for
rubber and plastic filler and ceramic base material.
Specifications:
Type | D50(um) | S.S.A.(m2/g) |
SA-05 | 5±1 | 0.60 |
SA-10 | 10±2 | 0.50 |
SA-20 | 20±3 | 0.40 |
SA-30 | 30±3 | 0.30 |
SA-40 | 40±5 | 0.20 |
SA-70 | 70+/-6 | 0.12 |
Physical Property:
| Appearance | White powder |
| Specific Gravity (g/cm3) | 3.60 |
| Melting point (℃) | 2050 |
| Moisture (%) | ≤ 0.05 |
| EC(uS/cm) | ≤ 10 |
| PH | 7.0±0.5 |
| α-Al2O3 Cotent(%) | ≥ 90 |
| Spherical particles ratio(%) | ≥ 95 |
Chemical Property:
| Type | Chemical Composition |
| Al2O3% ≥ | SiO2% ≤ | Fe2O3% ≤ | Na2O%≤ | K2O% ≤ | MgO%≤ | CaO% ≤ |
| SA-05 | 99.0 | 0.05 | 0.05 | 0.03 | 0.02 | 0.01 | 0.01 |
| SA-10 | 99.0 | 0.05 | 0.05 | 0.03 | 0.02 | 0.01 | 0.01 |
| SA-20 | 99.0 | 0.05 | 0.05 | 0.02 | 0.01 | 0.01 | 0.01 |
| SA-30 | 99.0 | 0.05 | 0.05 | 0.02 | 0.01 | 0.01 | 0.01 |
| SA-40 | 99.0 | 0.05 | 0.05 | 0.02 | 0.01 | 0.01 | 0.01 |
| SA-70 | 99.0 | 0.05 | .05 | 0.02 | 0.01 | 0.01 | 0.01 |
Character:
1. High filling density: With its large particle diameter and broad
particle size distribution,realizes highdensity filling for rubber
and plastic and producescompounds with low viscosity and good
fluidity.
2. High thermal conductivity: High filling density enables
production of compounds with higher thermal conductivity and higher
heat dissipation rate compared to crystalline silica.
3. Low abrasivity: Due to its Spherical shape, less-wearing of
kneading machines, forming machines and dies.
Applications:
1. Filler for heat sink sheet, filler for heat dissipation board
(MC board), heat dissipating
grease, phase change sheet
2. Filler for semiconductor sealing resin
3. Silicone-based heat dissipating adhesive, filler for compound
4. Ceramic filler
Quality control:
