3D-Pro-ML All-in-One Zirconia 900-1200MPa Flexural Strength Full Contour Restoration

The Future of Gradient Zirconia: Precision-Layered for Natural Perfection
Discover 3D-Pro-ML – the groundbreaking 5-layer gradient zirconia that replicates nature's blueprint in a single block. Engineered with patented co-pressing technology, this revolutionary material transitions seamlessly from 49% incisal translucency to 1200MPa dentin strength, delivering unprecedented biomimetic aesthetics without manual layering. Achieve perfect Vita/Ivoclar shade matching while eliminating material inventory complexity.

Biomimetic Layer Engineering

1. Enamel Layer (25%)

   • 49% light diffusion | Edge stability at 50N force

   • Mimics natural incisal halo effect

2. Transition Matrix (40%)

   • Progressive translucency gradient (47%→43%)

   • Strength transition (900→1100MPa)

3. Dentin Core (35%)

   • 42% opacity | 1200MPa load-bearing

   • Superior crack resistance (6.5 MPa·m¹/²)

Scientific Innovation

Application Mastery

▶️ Anterior Excellence

• 0.3mm margin integrity for minimal-prep veneers

• Vita 16 shade matching accuracy: 98.6%

▶️ Posterior Performance

• 1200 HV10 hardness for molar crowns

• 0.02mm flexure under 250N load (bridges)

▶️ Full-Arch Solutions

• Dentin core prevents framework deformation

• 28% opacity masks titanium graying

Precision Manufacturing

Co-Pressing Process Flow:

Technical Specifications

Workflow Revolution

Stage 1: Intelligent Milling

• Zero interlayer separation at 40,000 RPM

• 22% faster than monolithic zirconia

Stage 2: Precision Sintering

• Uniform 20.1% shrinkage (±0.15%)

• Warp-free results for spans >40mm

Stage 3: Effortless Finishing

• Achieve Ra 0.03μm in 3 minutes

• Glaze bond strength: 46 MPa (ISO 9693)

Clinical Validation

3-Year Study (n=3,500 restorations)

Zirconia Selection Guide

Laboratory Efficiency Gains

Technical Support

24/7 Material Science Hotline

• Gradient design consultation

• Sintering profile optimization

• Case failure analysis

Digital Integration

• 3Shape/exocad presets

• DWX/Roland milling protocols

• Shade matching algorithms

Frequently Asked Questions

Q: Minimum thickness for anterior crowns?
A: 0.5mm with full enamel layer preservation

Q: Compatible with which staining systems?
A: None required - inherent Vita/Ivoclar shades

Q: Optimal sintering parameters?
A: 1500°C with 90-120 min hold, ≤2°C/min cooling below 800°C

Certifications: ISO 13356:2017 | FDA K213655 | CE 0501 | MDR Compliant
Composition: ZrO₂+HfO₂+Y₂O₃ ≥99% | Al₂O₃ <0.15%
Shelf Life: 36 months (nitrogen-flushed UV-block packaging)

Critical Notes:

• Maintain minimum 0.3mm layer thickness during milling

• Use diamond burs ≥100μm grit

• Avoid rapid cooling below 800°C

Indications For Use