EPR Insulated CPE Sheathed Cable Rubber Electrical Cable 0.5mm2 - 300mm2

Flexible Copper Conducotor H07RN-F EPR Insulated CPE Sheathed Cable​

Construction:

Conductor: Flexible Class 5 Copper Conductor

Insualtion: Rubber Sheath

Sheath: Rubber Sheath

Specifications

1 IEC, RN, DIN, BS, GB standard
2 ISO, CCC, KEMA, CE, TUV certification
3 Response within 12 hours
4 Free Sample
5 Factory direct sale

Application

For use at medium mechanical stress in dry, wet and damp locations, as well as in free air. Also for fixed installation on plaster or machines. The cable is resistant to oil, uv-radiation and ozon.

Technical data

Rubber sheathed cable H07 RN-F to DIN VDE 0282 part 4, HD 22.4 S4, BS 7919 equal to IEC 60245-4.

Temperature range

-30℃ to +60℃

Permissible operating temperature at conductor +60℃

Nominal voltage U0/U 450/750 V in case of protected and fixed installation U0/U 600/1000 V

Max. permissible operating voltage in three phase and one phase a.c. system U0/U 476/825V

Direct current-system U0/U 619/1238 V

Test voltage 2500 V

Permanent tensile load

max. 15 N/mm2

Minimum bending radius

For fixed installation 4X cable ø

For guiding over roller 7.5X cable ø

During winding on drums 5-7X cable ø

Cable structure

Copper conductor fine wire stranded, bare to DIN VDE 0295 class5, BS 6360 class5, IEC 60228 class5 and HD 383.

Rubber core insulation EI4 to DIN VDE 0282 part 1

Insulation thickness to DIN VDE 0282 part 4

Core identification to DIN VDE 0293-308

Core colours

-up to 5 cores one-coloured

-6 and more cores, black with numbering

-3 and above, with green-yellow earth core

-2 cores without green-yellow earth core

Cores stranded in layers with optimal lay-length

Outer jacket of rubber black, rubber compound ti DIN VDE 0282 part 1

Sheath thickness to DIN VDE 0282 part 4

Properties

Resistant to

Weather

Test

Test according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)

Ozone resistant of the insulation to DIN VDE 0472 part 805, test method A or part 805 A1, test method C

Oil resistant

Test according to EN 60811-2-1

Founded in 2000, HOLD-ONE. is a modern large-scale enterprise specializing in R&D and manufacturing of wire and cable. The company has an insulated wire workshop, a low voltage cable workshop, a high voltage cable workshop and cable accessories, and a copper processing workshop. It consists of administrative affairs department, marketing department, technology research and development department, quality management department, planning and finance department, material supply department, safety production department, etc., and has sales and service organizations in 106 large and medium cities across the country. The company's leading products are: rubber sheathed flexible cable, polyethylene sheathed flexible cable, PVC insulated control cable, PVC insulated power cable, overhead insulated cable, aluminum stranded wire and steel core aluminum stranded wire, PVC insulated Sheath (soft) wire and cable, etc., and focus on the development and production of low-smoke halogen-free, low-smoke low-halogen, pre-branch cable and various flame retardant, fire-resistant, shielding and other special cables up to more than 10,000 specifications. The annual production capacity can reach 1 billion yuan. Companies can produce according to national or international

standards.