SiC Heater Silicon Carbide Heating Elements For High Temperature
Furnace
1. Introduction
SiC Heater Element is a kind of non-mental high temperature
electric heating element.It is made of selected high-purity green
silicon carbide as raw material which is made into blank and
silicon crystal under high temperature of 2400ºC. It mainly used
for furnance heating temperature from 600C-1600ºC. It is widely
used in electric heating of glass, chemical, electronic material
etc.
| SiC Content | 98.5% |
| Type | Air Heater |
| Tube diameter | 8mm to 50mm |
| Voltage | 110-480V |
| Warranty | 1 Year |
| Material | Silicon Carbide (SiC) |
| Working temperature | 600C-1600C |
| Application | Furnace heating |
2. Types
1) U type
2) W type
3) Rod type
4) Single spiral
5) Dumb bell
6) Double spiral
3. Features
1. withstand high temperature as high as 1600℃
2. high strength and excellent shock resistance
3. heat source is free of noise and air pollution
4. anti-oxidization, anti-corrosion
5. easy to installation and maintenance
4. specification
5. Tips for usage
1. Be protected against damp during storing or installing to ensure
the performance ;
2. Divided before assembling. The tolerance of the resistance of
each one cannot exceed by 10% each other;
3. Be careful when using and maintaining;
4. When operating the electric furnace at the beginning, the
voltage should be increased slowly and cannot be fully loaded at
once. Otherwise the larger current will be resulted in the damage
of heater.
5. When heater is damaged and need to be changed, the resistance of
new ne should follow the increasing resistance. If many are damaged
or resistance increased too much, heater should be changed.
