140DDM39000 Schneider Relay Module
140DDM39000 is a high-performance PLC module launched by Schneider
Electric, which has industrial design standards, supports standard
communication rates, and can be manually set or achieve rate
adaptive function through dip switches. It is equipped with 6 dual
color LED status indicators and power fault relay output alarm
function. It uses a 9-pin Sub-D socket connector and complies with
the Profibus DP protocol specification. The communication rate
covers 9.6kBit/s to 12MBit/s, providing 4000V lightning protection,
1.5A overcurrent protection, and 600W surge protection. It supports
DC9-36V wide redundant dual power input and has DC1500V voltage
isolation and reverse connection protection function. The module
protection level reaches IP30. It is reinforced with corrugated
aluminum shell and standard industrial 35mm The guide rail
installation method is suitable for automation control systems in
complex industrial environments, which can significantly improve
the integration, flexibility, and maintenance efficiency of
mechanical control, while reducing installation and commissioning
costs.
Technical specifcations for 140DDM39000
Electrical parameters
Number of inputs/outputs and voltage:
Input quantity: 16 points, divided into 2 groups, each group has 8
points; Or another configuration is 2 groups, each with 4 points
(specific configuration may vary depending on product version or
application scenario).
Input voltage: 24VDC, limited to a specific range (such as<=1V
within 10s); <=1V within one cycle; 30V; 56V for 1.3ms). The
guarantee range for voltage state 0 is -3~5V, and the guarantee
range for voltage state 1 is 15~30V.
Output voltage: 24V, limited to 56V DC (within 1.3ms) or 19.2-30V
DC (typical value).
Current and power:
Maximum load current:<=4A per module,<=2A per group,<=0.5A
per point.
Absolute maximum output: 5A per point (within 500 µ s).
Leakage current: 0.4mA at 30V DC.
Power consumption: 1.75W+(0.36x energized input point)+(1.1x total
output load current).
Required bus current: 330mA.
Electrical characteristics:
Input impedance: 2500 ohms.
Load capacitance:<=50 µ F.
Voltage drop: 0.4V at 0.5A.
Output response time: The transition time from state 1 to state 0
or from state 0 to state 1 is less than or equal to 1ms.
2, Mechanical and environmental parameters
Product weight: Approximately 0.3kg (specific weight may vary
depending on product version or configuration).
Protection level: IP30 (providing a certain degree of dust and
water protection).
Working temperature and humidity: Although the specific range of
working temperature and humidity may vary depending on the product
version or application scenario, industrial grade equipment can
typically operate stably within a wide range of temperature and
humidity.
3, Communication and interface parameters
Data electrical interface: Using a 9-pin Sub-D socket connector,
the pin definitions comply with the protocol specifications of
Profibus DP and support the Profibus DP bus standard.
Communication speed: Supports multiple communication speeds, such
as 9.6
kBit/s,19.2kBit/s,45.45kBit/s,93.75kBit/s,187.5kBit/s,500kBit/s,1.5MBit/s,6MBit/s
And 12MBit/s.
Terminal resistor: This device does not come with a terminal
resistor and needs to be externally connected as needed.
4, Power supply and protection parameters
Power supply: Supports dual power redundant input, with a voltage
range of DC (9-36) V and a typical value of DC24V. Power
consumption is less than 4W, with DC1500V voltage isolation and
reverse protection function.
Protection function: Equipped with 4000V lightning protection, 1.5A
overcurrent protection, and 600W surge protection.
More Products In Stock:
| ATV320U06N4B | ATV320U02M2B | ATV320U07M2B | ATV320U07M2C |
| ATV320U07N4B | ATV320U07N4C | ATV320U11M2B | ATV320U11M2C |
| ATV320U11N4B | ATV320U11N4C | ATV320U15M2B | ATV320U15M2C |
Our Services:
1,All our products are new and orginal, and of good quality
2,Our prices are very competitive.
3, We have a large quantity in stock, so we could help the
customers to get the components which are dificult to get.
4,All inquiries will be valued and will reply in 24.
Packing & Delivery:
1,100% brand New and Original Factory Seal!
2,Warranty:1 year
3,Package: Original packing with cartons.
4,Delivery time: Shipped in 3-7 days after payment
5,All the goods will be tested before shipment
