Single Girder Electric Wire Hoist With Modular design European
Style 16T 18M
| model | | VTW-S 16T |
| SWL | t | 16 |
| lifting height | m | 12 |
| lifting speed | m/min | 0.66/4.0 |
| travel speed | m/min | 5-20 |
| power in | V;HZ | 220~460V 50/60Hz |
| FEM(GB) | -- | 2m(M5) |
| lifting motor | power | KW | 2.6/16 |
| RPM | n/min | 460/2770 |
| insulation | -- | F |
| production | -- | IP55 |
| duration | -- | 40% |
| rated current | A | 33 |
| lift gear ratio | -- | 169 |
| drum dia | mm | 295 |
| wire rope | -- | 15-8*26S+2160 |
| travel motor | power in | KW | 2*0.75 |
| RPM | n/min | 35.2-140.8 |
| insulation | -- | F |
| production | -- | IP55 |
| duration | -- | 60% |
| rated current | A | |
| wheel dia | mm | 150 |
1. Electrical control system:
Complies with the standards of the International Electrotechnical
Commission (such as IEC).
The protection level is usually IP55 or higher, which can
effectively prevent dust and splash water and adapt to harsh
industrial environments.
The standard configuration is usually 380V/400V, 50Hz three-phase
AC (commonly used in China), and other voltages/frequencies can be
customized according to requirements.
Flexible control method: can be equipped with a flashlight (hanging
button box), remote control (wireless or wired) or operated in the
driver's cab.
Lifting speed: The standard configuration is usually single speed
(such as about 3-4 m/min), but it is more common and practical to
configure dual speed (normal speed + slow speed, such as 4 m/min +
0.8 m/min) or variable frequency speed regulation to achieve more
accurate hoisting positioning and soft start/stop.
2. Complete safety devices (compliant with CE and other
requirements):
Overload protection: Overload is usually prevented by electrical
systems (such as thermal relays) or mechanical overload limiters
(more reliable, directly cutting off the lifting power).
Upper and lower limit switches: Mechanical or electronic limit
switches that automatically cut off the power supply of the lifting
motor when the hook reaches the highest or lowest limit position to
prevent top or excessive lowering.
Emergency stop button: A conspicuous emergency stop button is
provided on the control device (flashlight/remote control) to cut
off the main power supply in an emergency.
Phase sequence protection/phase loss protection: Prevent the motor
from being damaged by the wrong phase sequence of the power supply
or phase loss operation.
Brake wear monitoring (optional): Advanced models may be equipped
with a brake pad wear detection device.
Wire rope anti-loosening protection (optional): Prevent excessive
relaxation of the wire rope when the hook is empty or without load.
3. Working level and application:
European hoists are usually designed for higher working levels
(such as FEM 1Am, 2m, 3m or M4, M5, M6). 16 tons 15 meters
configuration is often used in occasions with medium frequency of
use and load rate
