The Oilless Self-Lubricating Plain Bearing Bronze Sleeve Bearings 090 & 092, designed with holes, are specifically tailored for mining machinery. These bearings offer exceptional durability and performance in harsh mining environments, eliminating the need for regular lubrication. The bronze material ensures superior wear resistance, while the self-lubricating feature maintains smooth operation over extended periods. The holes in the bearings facilitate easy installation and allow for effective heat dissipation, enhancing overall bearing performance. Ideal for mining equipment that demands reliable and efficient bearings, these Oilless Self-Lubricating Bronze Sleeve Bearings are a must-have for any mining machinery application.

Self Lubricating Plain Bearings & wrapped bronze bushings

Bronze bearings made of CUSN8. With grease reservoirs. Bearing forms made to order: Cylindrical bushes with non-standard dimensions ...Bronze Sleeve 090 Series Bushings are widely applied in hoisting and other construction machines, automobiles, tractors, trucks, machines tools and some mining engines. It can be fabricated into bushings, half bushings, flanged bushings, thrust washers, spherical bushings and more.

Plain Bearings & Self-lubricating Bushings | VIIPLUS Surface Engineering|Bearing Technology

VSB-22 FLANGE BUSHES Bronze Bearings made of CuSn8 with Lubrication Indents

Bronze Wrapped Bearing with Oil Pockets(090 Cylindrical Bushes)

VSB-22 090 CYLINDRICAL BUSHES FLANGE BUSHES
Bronze Bearing Factory,Bronze Bushing supplier,CuSn8 flange bronze bush
Bearing material made of solid bronze strip with indents for lubrication

1. Good wear resistance, suitable for rough conditions

2. Optimum performance under relatively high loads and low speeds

3. Easy for fitting and lubricating

4. High load capacity

5. Inner Diameter machineable parts are available against order

6. High level thermal conductivity

7. Minimum overall dimensions

8. Chemical resistance.

9. Initial pre-lubrication at assembly required

The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.

Technical Data

Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents

Tech. Data

FB092 Standard Bearing Size

Unit:mm

Availability

Bearing forms available in standard dimensions
Cylindrical bushes
Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs

Typical Applications

VIIPLUS BEARINGS bushings can be widely used as components necessary in mechanical industries or for repair and maintenance of various machines.

• Automotive industry:

• Wiper arms, door hinges, trunk hinge, foot pedals, shock absorbers, enines, camshafts, connect rod, steering system, pedal assembly, seat angle regulator, etc.

• Office machines:

• Copy machines, fax machines, joint and reciprocation parts of faxed, paper shredders, scanners and printers, starting and hinge parts of fitness equipment, doors and windows.

• Agricultural machinery:

• Planting machines, mills, potato harvester, tractors, etc.

• Paper/wood/pulp industry:

• Timber- & chain-saws, cutting machines, folding machines, looms, tec.

• Steel industry:

• Sliding plates, steel & rooling-mills, body presses, tool posts, etc.

• Electricity tools:

• Switch gearsm contactors, pneumtools, hydraulic tools, transformers, etc.

• Domestic appliances:

• Microwave ovens, food processors(mixers, blenders), lawn mowers, sewing machines, etc.

• Medical equipment:

• Dental equipment, X-ray equipment, medical turntables, wheelchairs, etc.

• Construction industry:

• Lift components, excavators, concrete mixers, s, escalators, etc.

• Other used:

• Valves, blinds, drying plant, baking machinery, screws and bolts, awnings, etc.

Beyond Grease: A Deep Dive into Oilless Bushings & Why Viiplus Leads the Way

Friction is the enemy of efficiency. In countless machines, from massive industrial equipment to intricate automotive components, the constant battle against wear and tear dictates performance, longevity, and maintenance costs. Traditionally, grease and oil have been the go-to solutions, but they come with their own set of challenges: frequent re-lubrication, potential contamination, environmental concerns, and limitations in extreme conditions.

Enter the world of oilless bushings, also known as self-lubricating bearings or sliding bearings. These innovative components offer a smarter way to manage friction, delivering reliable movement without the need for external lubrication.

At Viiplus (www.viiplus.com), we don't just supply these components; we engineer solutions. Leveraging deep expertise in metallurgy and tribology (the science of friction, wear, and lubrication), we've become a leading name in sliding bearing technology. But what exactly are oilless bushings, and why should they be on your radar? Let's dive deeper.

What Exactly Are Oilless Bushings? The Science of Self-Lubrication

Unlike traditional ball or roller bearings that rely on rolling elements and require constant lubrication films, oilless bushings operate on the principle of sliding motion. Their "magic" lies in their material composition and structure, designed to provide their own lubrication at the bearing surface. This can be achieved through several key technologies:

1. Solid Lubricants Embedded: Materials like graphite, MoS₂, or PTFE are embedded directly into the metallic matrix (often bronze) of the bushing. As the shaft rotates or slides, a minuscule amount of this solid lubricant is transferred to the mating surface, creating a low-friction film.

2. Porous Metal Structures: Sintered bronze or iron materials are created with microscopic pores. These pores are vacuum-impregnated with oil during manufacturing. In operation, slight heating causes the oil to expand and seep onto the bearing surface, providing lubrication. When it cools, the capillary action draws the oil back in, creating a closed-loop system.

3. Layered Composites: These often feature a strong backing (like steel), an intermediate sintered layer (like bronze), and a low-friction overlay (often PTFE-based). The PTFE layer provides the primary sliding surface, offering extremely low friction.

4.  

Contrasting Logic: Oilless vs. Traditionally Lubricated Bearings

The Tangible Benefits: Why Make the Switch?

Choosing oilless bushings isn't just about eliminating grease guns. It's about unlocking significant operational advantages:

• Drastically Reduced Maintenance: This is the most obvious benefit. No re-greasing means less labor, less scheduled downtime, and simplified maintenance protocols. Imagine the savings across a factory floor!

• Enhanced Reliability: Lubricant starvation is a major cause of bearing failure. Self-lubricating bearings ensure consistent lubrication, leading to predictable performance and longer service life, especially in hard-to-reach locations.

• Superior Performance in Harsh Conditions: Oilless bushings excel where traditional lubricants fail:

  • High Temperatures: Certain types can operate at temperatures far exceeding the limits of conventional greases.

  • Low Temperatures: No grease means no stiffening or freezing issues.

  • Contaminated Environments: The absence of sticky grease reduces the ingress of dirt, dust, and debris.

  • Vacuum or Underwater: Ideal for applications where liquid lubricants are impractical or impossible.

  •  
  •  
  •  
  •  
  •  
  •  
  •  

• Cost Savings (Total Cost of Ownership): While the initial purchase price might sometimes be higher, the TCO is often significantly lower due to savings on lubricants, labor, downtime, and potential component failure replacement.

• Environmental Friendliness: Eliminating oil and grease leakage prevents contamination of products, machinery, and the environment. Crucial for industries like food processing, pharmaceuticals, and textiles.

• Compact & Simplified Designs: Without the need for lubrication systems (nipples, lines, reservoirs), machine designs can be more compact and streamlined.

•  

Exploring Viiplus's Portfolio: Finding Your Solution

Viiplus offers a comprehensive range of self-lubricating bearings designed to meet diverse application needs. Understanding the different series helps in selection:

• JDB Series (Graphite Plugged Bronze): Excellent for high-load, low-speed applications, intermittent motion, and high temperatures. The graphite plugs provide continuous solid lubrication. Ideal for heavy machinery, molds, and hydraulic components.

• SF Series (PTFE-Based Composite): Typically metal-backed (SF-1: steel, SF-2: steel/bronze) with a PTFE-based lining. Offers very low friction, good wear resistance, and suitability for dry running or marginal lubrication. Common in automotive, office equipment, and hydraulics.

• JF Series (Bimetal Bushings): Combines a steel backing with a sintered bronze or lead-bronze lining. Good load capacity and fatigue strength. Often used with grease or oil but can operate marginally lubricated. Found in engines, chassis parts, and agricultural machinery.

• FB Series (Wrapped Bronze): Often made from bronze strip, sometimes with lubrication pockets or through-holes. A cost-effective solution for medium loads and speeds, typically requiring initial greasing but offering extended re-lubrication intervals.

•  

Quick Comparison Chart (General Guide):

(Note: This is a simplified guide. Always consult specific product data sheets or Viiplus experts for precise application requirements.)

Uncertain which material or type suits your project? Our Bushing Material Selection Guide is designed to help, or Contact Us for a Free Quote and Expert Advice.

Why Partner with Viiplus? Expertise Meets Quality

Choosing the right supplier is as critical as choosing the right bushing. Here’s why companies worldwide trust Viiplus:

• Deep Expertise: Our foundation in metallurgy and tribology, coupled with a talented R&D team, means we understand the science behind reliable movement. We don't just sell; we solve friction challenges.

• Uncompromising Quality: We employ advanced manufacturing techniques (including sand casting, centrifugal casting, metal casting, investment casting) and a rigorous quality management system, ensuring every bushing meets the highest standards.

• Comprehensive Range: From standard metric sizes in JDB, SF, JF, and FB series to custom solutions including cylindrical, flange, double flange bushings, wear plates, and guide rails – we have the portfolio to match your needs.

• Global Reach, Seamless Logistics: Based in China, we ship sliding bearings worldwide. Our professional team handles customs clearance efficiently, ensuring smooth, timely delivery with all necessary documentation.

• Customer-Centric Approach: We believe in ethical practices and building trust. We offer flexible production (single units to large series), competitive pricing, and  online support.

•